CY7B9920-5SI
| Parameters | |
|---|---|
| Power Dissipation | 104mW |
| Frequency (Max) | 80MHz |
| Family | 7B |
| Input | Clock |
| Ratio - Input:Output | 1:8 |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Duty Cycle | 50 % |
| Height Seated (Max) | 2.667mm |
| Width | 7.5055mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CY7B9920 |
| Output | CMOS |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 90mA |
CY7B9920-5SI Overview
In order to package it as a clock IC, the Tube package is used. This clock generator is embedded in the 24-SOIC (0.295, 7.50mm Width) package. The peak reflow temperature (Cel) amounts to 220 to be essentially indestructible. As you can see, it consists of 24 terminations. For this clock generator ic, a voltage of 5V is required. As the Clock PLL's input, Clock is designed to be used in order to generate the clock signal. Using 1 circuits, the electronic part's full performance can be accessed. RF synthesizers based on this clock provide frequencies up to 80MHz maximum. The Surface Mount allows this electrical component to be easily installed on the panel. This clock PLL works with a supply voltage of 4.5V~5.5V. Test statistics suggest setting the ambient temperature at -40°C~85°C, which is -40°C~85°C. CMOS is designed for clock generator's output. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. It is a 24-bit clock PLL designed specifically for microprocessors. This part number CY7B9920 is related to the following electrical components. PLL is designed with 24 pins. Clock PLL is capable of handling a voltage of 5V. 8 signal outputs are provided for enhancing output frequency as much as possible. There is a low timing skew at 0.5 nsmax with this RF synthesizer. The 7B family of parts can be used to find electronic parts that are similar to each other.
CY7B9920-5SI Features
Available in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
CY7B9920-5SI Applications
There are a lot of Cypress Semiconductor Corp CY7B9920-5SI Clock Generators applications.
- Reference signals to RF systems
- Threshold extension
- Radiotelephones
- Pagers
- Remote telemetry and instrumentation
- Precision auxiliary angle deflection measurement
- Sampling clocks for ADC and DAC
- Digital logic circuits
- Frequency Modulation (FM) stereo decoders
- Satellite receivers
