Parameters |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
44-LQFP |
Surface Mount |
YES |
Number of Pins |
44 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
Series |
RoboClockII™ Junior |
JESD-609 Code |
e4 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
44 |
ECCN Code |
EAR99 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.8mm |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
CY7B9930 |
Output |
LVTTL |
Pin Count |
44 |
Number of Outputs |
10 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
200mA |
Frequency (Max) |
100MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:10 |
Max I(ol) |
0.03 A |
PLL |
Yes |
Differential - Input:Output |
Yes/No |
Prop. Delay@Nom-Sup |
0.5 ns |
Propagation Delay (tpd) |
0.5 ns |
Same Edge Skew-Max (tskwd) |
0.65 ns |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B9930V-5AXCT Overview
Clock ICs are packaged using the Tape & Reel (TR) method. The 44-LQFP package contains this clock generator. When reflowed, this frequency generator can withstand a maximum temperature of 260. It contains 44 terminations that can be found in frequency synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. As the Clock PLL's input, LVPECL, LVTTL is designed to be used in order to generate the clock signal. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. An upper frequency limit of 100MHz Max can be achieved with this clock-based frequency synthesizer. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. The maximal supply voltage (Vsup) reaches 3.63V. There should be a voltage supply above 2.97V for this frequency generator in order to ensure its safety. This clock PLL works with a supply voltage of 2.97V~3.63V. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. The frequency synthesizer in this product is compatible with all levels of LVTTL logic. This electronic component is usually classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. The clock-generating IC is a 44-bit device designed specifically for microprocessors. It is possible to find its related electronic parts by searching for the base part number CY7B9930. PLL is designed with 44 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. As such, it is often referred to as a kind of Clock Drivers clock PLL. This frequency synthesizer features CONFIGURABLE AS SINGLE ENDED TTL ALSO to produce better clock signals. There are a number of electronic parts in the RoboClockII? Junior series, including this one. The output frequency is magnified as high as possible with 10 signal outputs. There is a low timing skew at 0.65 nsmax with this RF synthesizer. This clock generator belongs to the family of 7B.
CY7B9930V-5AXCT Features
Available in the 44-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B9930V-5AXCT Applications
There are a lot of Cypress Semiconductor Corp CY7B9930V-5AXCT Clock Generators applications.
- Skew suppression
- High-frequency induction heating
- Ultrasound diagnosis
- Jitter reduction
- PCI express cards
- Infotainment systems
- Deep space exploration
- Bluetooth transmitters
- PMR (Professional Mobile Radio)
- 1 Gigabit Ethernet