Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LQFP |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY7B993 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Frequency (Max) |
100MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.002 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.25 ns |
Propagation Delay (tpd) |
0.25 ns |
Divider/Multiplier |
Yes/Yes |
Same Edge Skew-Max (tskwd) |
0.5 ns |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B993V-2AXCT Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. The 100-LQFP package includes this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 100 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. There is a Clock PLL called LVPECL, LVTTL which is designed to be the input to this clock generator. 1 circuits are used to achieve clock PLL's superior flexibility. Providing a maximum frequency of 100MHz, this clock-based RF synthesizer is suitable for a variety of applications. PLL clock is mounted in the way of Surface Mount. Clock PLL is capable of receiving a maximum of 3.63V as a supply voltage. The supply voltage (Vsup) should be kept above 2.97V for normal operation. There are 2.97V~3.63V available for use with this clock PLL. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. The RF synthesizer is compatible with LVTTL logic levels. As far as electrical parts go, this component can be classified as a Clock Buffer, Fanout Distribution component. It is a 100-bit clock PLL designed specifically for microprocessors. This part number is related to its related electronic parts. It is possible to connect to the PLL via 100 pins. In terms of the supply voltage, analog clock generator can handle 3.3V volts. Clock generator can also be included into Clock Drivers. A frequency synthesizer with CONFIGURABLE AS SINGLE ENDED TTL ALSO features better clock signal output. RoboClock? series electronic parts are used in this part. The output frequency can be magnified as high as possible with the assistance of 18 signal outputs. This clock generator offers low timing skew at 0.5 ns Max. You can find similar electronic components by searching for the 7B family.
CY7B993V-2AXCT Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B993V-2AXCT Applications
There are a lot of Cypress Semiconductor Corp CY7B993V-2AXCT Clock Generators applications.
- Cell phones
- Televisions
- Coherent carrier tracking
- DVD add-on cards for multimedia PCs
- Skew suppression
- CB radios
- Computers to manage memory cards
- Threshold extension
- PMR (Professional Mobile Radio)
- Multi-function printers