CY7B993V-2AXI
| Parameters | |
|---|---|
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B993 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Propagation Delay | 200 ps |
| Frequency (Max) | 100MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
CY7B993V-2AXI Overview
Clock generator is packaged in the way of Tray. The 100-LQFP package includes this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. In it, there are 100 terminations to be found. The supply voltage of 3.3V allows for high efficiency. There is a Clock PLL called LVPECL, LVTTL which is designed to be the input to this clock generator. There are 1 circuits implemented in order to achieve full performance from this electronic part. An up to 100MHz frequency is provided by this clock-based RF synthesizer. With the Surface Mount, it is easy to install this electric component on the panel. Clock generators can take up to 3.63V of power as a maximum supply voltageSafety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.97V. As long as you provide 2.97V~3.63V supply voltage, it will work. As determined by the test statistics, the ambient temperature should be set to -40°C~85°C. In this case, we are dealing with a frequency synthesizer that can be used with LVTTL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Buffer, Fanout Distribution component. An IC that generates clocks specifically for microprocessors, this clock PLL is 100-bits in si100e. This part number is related to its related electronic parts. The clock PLL has 100 pins that are available. This time clock generator can handle a voltage of 3.3V as its supply voltage. As such, it is often referred to as a kind of Clock Drivers clock PLL. The frequency generator has a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature to improve the output of clock signals. This clock generator is a member of RoboClock? series. Clock PLL has 18 signal outputs to maximi18e output frequency. The timing skew of this frequency synthesizer is low at 0.5 nsmax. If you search for the 7B family of electronic parts, you will be able to find similar parts.
CY7B993V-2AXI Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B993V-2AXI Applications
There are a lot of Cypress Semiconductor Corp CY7B993V-2AXI Clock Generators applications.
- Media broadcast servers
- Vector network analyzers (VNA)
- Pagers
- Small signal recovery
- Phase modulation cellular systems
- Clock generation systems
- Bit synchronization
- Instrument
- Radar
- Satellite navigation communication
