Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LQFP |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
0°C~70°C |
Packaging |
Tray |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY7B993 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Frequency (Max) |
100MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.002 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.5 ns |
Propagation Delay (tpd) |
0.5 ns |
Divider/Multiplier |
Yes/Yes |
Same Edge Skew-Max (tskwd) |
0.5 ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B993V-5AXC Overview
Tray-method packaging is used for clock ICs. There is a clock generator embedded in the 100-LQFP package. This clock generator ic can sustain 260 degrees of temperature during reflowing. As a result of this, we can find 100 terminations. Clock generator ics require a voltage of 3.3V. As the Clock PLL's input, LVPECL, LVTTL is designed to be used in order to generate the clock signal. For full access to the electronic component's capabilities, 1 circuits are implemented. There is a maximum frequency of 100MHz Max with this clock-based frequency generator. With the Surface Mount, it is easy to install this electric component on the panel. This clock generator would require a maximum supply voltage of 3.63V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.97V. As far as the supply voltage is concerned, clock PLL can be used with 2.97V~3.63V. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. LVTTL is designed for clock generator's output. A Clock Buffer, Fanout Distribution is a classification for the electronic part in question. The clock-generating IC is a 100-bit device designed specifically for microprocessors. According to the base part number CY7B993, its related parts can be found. There are a number of 100 pins that are available on the frequency synthesizers. Time clock generator can handle a voltage of 3.3V as the supply voltage. A Clock Drivers clock generator is essentially what this device is. A frequency synthesizer with CONFIGURABLE AS SINGLE ENDED TTL ALSO features better clock signal output. This clock generator is a member of RoboClock? series. 18 signal outputs maximi18e the output frequency. Low timing skew is provided by this analog clock generator at maximum 0.5 ns. When searching for electrical components belonging to the 7B family, similar parts can be found.
CY7B993V-5AXC Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B993V-5AXC Applications
There are a lot of Cypress Semiconductor Corp CY7B993V-5AXC Clock Generators applications.
- Cellular/4G
- Telecommunication systems
- Walkie-talkies
- Digital circuits
- DVD add-on cards for multimedia PCs
- Signal generator
- Medical equipment
- Mixed mode (analog and digital) applications
- Time to digital converters
- 1 Gigabit Ethernet