CY7B993V-5AXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY7B993 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Propagation Delay | 200 ps |
| Frequency (Max) | 100MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B993V-5AXI Overview
As a clock IC, PLLs is packaged using the Tray method. As part of the 100-LQFP package, this clock generator is embedded. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. It contains a total of 100 terminations within RF synthesizer. The supply voltage of 3.3V allows for high efficiency. In this clock generator, LVPECL, LVTTL is used as the input to the clock. There are 1 circuits implemented in order to achieve full performance from this electronic part. The frequency generator has a maximum frequency of 100MHz. The Surface Mount allows this electrical component to be easily installed on the panel. There is a maximum voltage of 3.63V for this clock generator. For safety reasons, this frequency generator's supply voltage should remain above 2.97V. There should be 2.97V~3.63V provided with this RF synthesizer. Based on the test statistics, an ambient temperature of -40°C~85°C should be set. There are several logic levels in LVTTL logic that can be used with this clock generator. As far as electrical parts go, this component can be classified as a Clock Buffer, Fanout Distribution component. There is a 100-bit clock-generating IC built specifically for microprocessors in this frequency generator. You can find related electrical components to the base part number CY7B993. PF synthesizers is equipped with 100 pins. Supply voltage 3.3V is what clock generator can handle. Clock Drivers-type frequency generators are usually classified as this type. This clock PLL features CONFIGURABLE AS SINGLE ENDED TTL ALSO for better clock signal output. RoboClock? series electronic parts are used in this part. Clock PLL is facilitated with 18 signal outputs to magnify output frequency as high as possible. Low timing skew is provided by this analog clock generator at maximum 0.5 ns. When searching for electrical components belonging to the 7B family, similar parts can be found.
CY7B993V-5AXI Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B993V-5AXI Applications
There are a lot of Cypress Semiconductor Corp CY7B993V-5AXI Clock Generators applications.
- Notebooks
- Vector network analyzers (VNA)
- PCI express cards
- Modems
- Medical equipment
- FMCW Radar
- Small signal recovery
- Tracking filters
- Closed circuit systems
- Picocells, femtocells and small cells
