CY7B993V-5AXIT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B993 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 100MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B993V-5AXIT Overview
As a clock IC, it uses the Tape & Reel (TR) package. The 100-LQFP package includes this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains 100 terminations that can be found in frequency synthesizer. For this clock generator ic, a voltage of 3.3V is required. This Clock PLL will be fed by LVPECL, LVTTL as its input. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 100MHz, this clock-based RF synthesizer is suitable for a variety of applications. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Approximately 3.63V is the maximum supply voltage needed by this time clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 2.97V. In terms of supply voltage, RF synthesizer works with 2.97V~3.63V. The temperature should be set at -40°C~85°C to ensure reliable performance. As the name suggests, this is a clock generator that is compatible with LVTTL logic levels. This electronic component is usually classified as a Clock Buffer, Fanout Distribution component. There is a 100-bit clock-generating IC built specifically for microprocessors in this frequency generator. According to the base part number, its related parts can be founded. It is possible to connect to the PLL via 100 pins. RF synthesizers can handle a voltage of 3.3V as the supply voltage. Clock generator can also be included into Clock Drivers. With CONFIGURABLE AS SINGLE ENDED TTL ALSO, this clock generator produces better clock signals. It is part of the RoboClock? series of electronic components. 18 signal outputs allow for maximi18ation of output frequency. As a result of this digital clock generator, there is a low timing skew at 0.5 ns max. When searching for parts belonging to the 7B family, similar electric components can be found.
CY7B993V-5AXIT Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B993V-5AXIT Applications
There are a lot of Cypress Semiconductor Corp CY7B993V-5AXIT Clock Generators applications.
- Tracking filters
- Aerospace and defense
- Digital circuits
- Televisions
- Laptops
- Microwave radio
- Space communucation
- Walkie-talkies
- Ultrasound diagnosis
- Cellular/4G
