CY7B9940V-2AXCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 44-LQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | RoboClockII™ Junior |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | CY7B9940 |
| Output | LVTTL |
| Pin Count | 44 |
| Number of Outputs | 10 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 200mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:10 |
| Max I(ol) | 0.03 A |
| PLL | Yes |
| Differential - Input:Output | Yes/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Propagation Delay (tpd) | 0.25 ns |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.65 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B9940V-2AXCT Overview
As a clock IC, it uses the Tape & Reel (TR) package. The 44-LQFP package contains this clock generator. This clock generator will sustain a maximum temperature of 260 when reflown. There are 44 terminations found in the file. This clock generator ic should receive a voltage of 3.3V. LVPECL, LVTTL is designed for clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. Thanks to the Surface Mount, this electric component can easily be installed on a panel. Clock generators can take up to 3.63V of power as a maximum supply voltageThere should be a voltage supply above 2.97V for this frequency generator in order to ensure its safety. There are 2.97V~3.63V different supply voltages that can be provided for this RF synthesizer. Using the test statistics, it is estimated that the ambient temperature should be set to 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with LVTTL logic levels. This electronic component can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer. It is a 44-bit IC that is designed for microprocessors specifically. This part number is related to its related electronic parts. There are 44 pins on the frequency generator that are available for use. In terms of the supply voltage, PLL clock can handle 3.3V volts. The device is usually classified as a type of Clock Drivers device. There is a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature on this frequency generator in order to produce a better clock signal. The RoboClockII? Junior series includes this electronic part. The output frequency can be amplified as high as possible with its 10 signal outputs. The maximal same edge skew (tskwd) can not be exceeded. By searching for the 7B family, it is possible to find similar electrical components.
CY7B9940V-2AXCT Features
Available in the 44-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B9940V-2AXCT Applications
There are a lot of Cypress Semiconductor Corp CY7B9940V-2AXCT Clock Generators applications.
- CB radios
- Electronic countermeasures
- Bluetooth receivers
- Multiplexing communication
- Radar
- Radio receivers
- Main oscillator in receiver
- Mechanical devices
- Modems
- Carrier synchronization in wired communication
