Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LBGA |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
220 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Reach Compliance Code |
not_compliant |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
CY7B994 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.002 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.25 ns |
Propagation Delay (tpd) |
0.25 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.8 ns |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Lead Free |
CY7B994V-2BBIT Overview
As a clock IC, it is packaged by the Tape & Reel (TR) method. Embedded in the 100-LBGA package is this Clock PLL. Frequency generator is capable of operating at a maximum temperature of 220 when reflowing. As you can see, it consists of 100 terminations. Basically, a voltage of 3.3V should be applied to this electronic frequency generator. The input of this clock generator is designed to be LVPECL, LVTTL. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. Providing a maximum frequency of 200MHz, this clock-based RF synthesizer is suitable for a variety of applications. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There is a maximum voltage of 3.63V for this clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.97V. As long as there are 2.97V~3.63V supply voltages provided, clock generator ic should work. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. LVTTL is designed for clock generator's output. It is possible to classify this electronic component as a Clock Buffer, Fanout Distribution. It is a 100-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CY7B994. The frequency synthesizer has 100 pins that are available. RF synthesizers can handle voltages up to 3.3V. This clock generator can be classified as a kind of Clock Drivers in general. There is a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature on this frequency generator in order to produce a better clock signal. It is part of the RoboClock? series of electronic components. 18 signal outputs are provided for enhancing output frequency as much as possible. As a result of this digital clock generator, there is a low timing skew at 0.8 ns max. When searching for electrical components belonging to the 7B family, similar parts can be found.
CY7B994V-2BBIT Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-2BBIT Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-2BBIT Clock Generators applications.
- Electronic countermeasures
- CPUs
- Ports
- Navigation, positioning and surveillance system for aircraft, ships and ships
- 10 Gigabit Ethernet
- Signal analyzer
- Modems
- Multi-function printers
- Camera systems
- Satellite navigation communication