Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Copper, Silver, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LBGA |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tray |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e1 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Tin/Silver/Copper (Sn/Ag/Cu) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY7B994 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Propagation Delay |
200 ps |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.002 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.25 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.8 ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B994V-2BBXI Overview
A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. As part of the 100-LBGA package, this clock generator is embedded. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. In it, there are 100 terminations to be found. Basically, this time clock generator needs a voltage of 3.3V. This clock generator receives its inputs from LVPECL, LVTTL, which is designed to be the clock source. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock PLL is capable of receiving a maximum of 3.63V as a supply voltage. The supply voltage for this frequency synthesizer should be kept above 2.97V for safety considerations. Clock generators should operate with the voltage supply of 2.97V~3.63V. Based on test statistics, ambient temperature should be set at -40°C~85°C. This is a clock generator compatible with LVTTL logic levels. An electrical part such as this one can be classified as a Clock Buffer, Fanout Distribution component. Microprocessor-specific clock PLL with 100 bits. This part number CY7B994 is related to the following electrical components. There are 100 pins that are available on the clock PLL. There is a maximum supply voltage of 3.3V that frequency generators can handle. In general, this clock PLL is considered a Clock Drivers device. This frequency synthesizer features CONFIGURABLE AS SINGLE ENDED TTL ALSO to produce better clock signals. A member of the RoboClock? series, this electronic component is made of plastic. 18 signal outputs are provided for enhancing output frequency as much as possible. Low timing skew is provided by this analog clock generator at maximum 0.8 ns. You can find similar electronic components by searching for the 7B family.
CY7B994V-2BBXI Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-2BBXI Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-2BBXI Clock Generators applications.
- Telecommunication systems
- Mechanical devices
- 10 Gigabit Ethernet
- 1 Gigabit Ethernet
- Computers to manage memory cards
- Laptops
- Deep space exploration
- Wireless base station for LTE, LTE-advanced
- Antenna automatic tracking
- Digital circuits