CY7B994V-2BBXIT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Propagation Delay (tpd) | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-2BBXIT Overview
It is packaged using the Tape & Reel (TR) method since it is a clock IC. The 100-LBGA package includes this clock generator. This clock generator ic can sustain a maximum temperature of 260 during reflowing. As a result of this, we can find 100 terminations. This time clock generator should be voltaged at 3.3V. This Clock PLL will be fed by LVPECL, LVTTL as its input. There are 1 circuits implemented in order to achieve full performance from this electronic part. The frequency generator has a maximum frequency of 200MHz. Surface Mount-slots make it easy to mount this electronic component on panels. The maximum voltage this clock PLL can handle is 3.63V. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.97V. Clock generators should operate with the voltage supply of 2.97V~3.63V. Test statistics estimate a temperature of -40°C~85°C, which should be set as the ambient temperature. A frequency synthesizer which is compatible with the LVTTL logic levels is presented here. This electronic component is usually classified as a Clock Buffer, Fanout Distribution component. In particular, this clock PLL is designed to be used with microprocessors. It is possible to find its related electronic parts by searching for the base part number CY7B994. A 100 pin is available on the clock PLL. The supply voltage should be maintained at 3.3V for high efficiency. As such, it is often referred to as a kind of Clock Drivers clock PLL. CONFIGURABLE AS SINGLE ENDED TTL ALSO is included in this frequency generator to enhance clock signal output. This electronic part is a member of the RoboClock? series. 18 signal outputs enable clock PLL to magnify output frequency as high as possible. At 0.8 ns Max, this clock generator offers low timing skew. By searching for the 7B family, it is possible to find similar electrical components.
CY7B994V-2BBXIT Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-2BBXIT Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-2BBXIT Clock Generators applications.
- Deep space exploration
- High-speed communication applications
- Radiotelephones
- HDD recorders
- Set-top boxes
- Notebooks
- 10 Gigabit Ethernet
- Reference signals to RF systems
- Melting
- Wireless base station for LTE, LTE-advanced
