Parameters |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LQFP |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
0°C~70°C |
Packaging |
Tray |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY7B994 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.002 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.5 ns |
Propagation Delay (tpd) |
0.5 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.8 ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B994V-5AXC Overview
In order to package it as a clock IC, the Tray package is used. The 100-LQFP package embeds this Clock PLL. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. As a result of this, we can find 100 terminations. Basically, this time clock generator needs a voltage of 3.3V. LVPECL, LVTTL is designed for clock generator's input. 1 circuits are used to achieve clock PLL's superior flexibility. This clock-based frequency generator provides a frequency up to 200MHz Max. The Surface Mount allows the electrical component to be installed conveniently on the panel. It would take a maximum supply voltage of 3.63V to operate this time clock generator. A maximum voltage of 2.97V should be used for this frequency generator for safety reasons. Clock PLL works with 2.97V~3.63V supply voltage provided. Using the test statistics, we estimate that the ambient temperature should be 0°C~70°C. The frequency synthesizer in this product is compatible with all levels of LVTTL logic. As far as electrical parts go, this component can be classified as a Clock Buffer, Fanout Distribution component. It is a 100-bit IC that is designed for microprocessors specifically. The related electrical components for the base part number CY7B994 can be found below. There are 100 pins on the frequency generators that are available for use. There is a maximum supply voltage of 3.3V that electronic frequency generator can handle. Fundamentally, this is a kind of Clock Drivers clock PLL. CONFIGURABLE AS SINGLE ENDED TTL ALSO can also be founded when using frequency generators. This clock generator is a member of RoboClock? series. 18 signal outputs allow for maximi18ation of output frequency. At 0.8 ns Max, this clock generator offers low timing skew. A search for the 7B family will yield similar electronic parts.
CY7B994V-5AXC Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5AXC Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5AXC Clock Generators applications.
- DVD recorders
- VSAT (Small Ground Satellite Station)
- Mixed mode (analog and digital) applications
- Automatic control system test
- Ultrasound diagnosis
- Frequency shifting decodes
- Navigation, positioning and surveillance system for aircraft, ships and ships
- Test equipment
- Medical equipment
- Clock recovery