Parameters |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LQFP |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY7B994 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.002 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.5 ns |
Propagation Delay (tpd) |
0.5 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.8 ns |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B994V-5AXCT Overview
As a clock IC, it uses the Tape & Reel (TR) package. Embedded in the 100-LQFP package is this Clock PLL. When reflowed, this frequency generator can withstand a maximum temperature of 260. There are a total of 100 terminations in this file. This clock generator ic should receive a voltage of 3.3V. LVPECL, LVTTL is designed for clock generator's input. For full access to the electronic component's capabilities, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. Thanks to the Surface Mount, this electric component can easily be installed on a panel. It would be possible to supply this clock PLL with 3.63V of power. Keeping the supply voltage for this frequency synthesizer above 2.97V is recommended for safety reasons. Clock PLL works with 2.97V~3.63V supply voltage provided. The temperature should be set at 0°C~70°C to ensure reliable performance. The RF synthesizer is compatible with LVTTL logic levels. This is an electronic part that can be classified as a Clock Buffer, Fanout Distribution in this case. It is a 100-bit IC that is designed for microprocessors specifically. The related electronic parts of part number CY7B994 are listed below. The clock PLL has 100 pins that are available. PLL clock can handle a voltage of 3.3V as its supply voltage. Fundamentally, this is a kind of Clock Drivers clock PLL. CONFIGURABLE AS SINGLE ENDED TTL ALSO can also be founded when using frequency generators. There are a number of electronic parts in the RoboClock? series, including this one. The frequency synthesizer features 18 signal outputs to ensure as high a frequency as possible. The timing skew of this frequency synthesizer is low at 0.8 nsmax. This PLL belongs to the family of 7B.
CY7B994V-5AXCT Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5AXCT Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5AXCT Clock Generators applications.
- Skew suppression
- Smartphones
- Picocells, femtocells and small cells
- Bluetooth receivers
- Phase modulation cellular systems
- High-speed optical transport network (OTN)
- Media broadcast servers
- Bluetooth transmitters
- Pulsed digital systems
- Wide area power system