CY7B994V-5AXI
| Parameters | |
|---|---|
| Propagation Delay (tpd) | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
CY7B994V-5AXI Overview
Clock ICs are packaged using the Tray method. Embedded in the 100-LQFP package is this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains a total of 100 terminations within RF synthesizer. A voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called LVPECL, LVTTL and it is designed as the input for this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. There is a maximum frequency of 200MHz Max with this clock-based frequency generator. The Surface Mount allows the electrical component to be installed conveniently on the panel. Clock PLL is capable of receiving a maximum of 3.63V as a supply voltage. In order to maintain safety, this frequency generator should be supplied with voltages above 2.97V. There should be 2.97V~3.63V provided with this RF synthesizer. Using the test statistics, it is estimated that the ambient temperature should be set to -40°C~85°C. The frequency synthesizer in this product is compatible with all levels of LVTTL logic. This electronic component can be classified as a Clock Buffer, Fanout Distribution. In this IC, a 100-bit frequency generator is designed specifically for use in microprocessors. According to the base part number, its related parts can be founded. It is possible to connect to the PLL via 100 pins. Supply voltage 3.3V is what clock generator can handle. A Clock Drivers clock generator is essentially what this device is. The frequency generator has a CONFIGURABLE AS SINGLE ENDED TTL ALSO feature to improve the output of clock signals. The RoboClock? series includes this electronic part. Clock PLL is configured with 18 output. The timing skew of this frequency synthesizer is low at 0.8 nsmax. By searching for parts that belong to the 7B family, you can find electronic parts that are similar.
CY7B994V-5AXI Features
Available in the 100-LQFP
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5AXI Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5AXI Clock Generators applications.
- Quenching?
- Test and instrumentation equipment
- GPS systems
- MRI
- Radar
- Telecommunication systems
- Media broadcast servers
- Digital circuits
- Local oscillator source in receiver
- Satellite receivers
