Parameters |
Contact Plating |
Lead, Tin |
Mounting Type |
Surface Mount |
Package / Case |
100-LBGA |
Surface Mount |
YES |
Number of Pins |
100 |
Operating Temperature |
0°C~70°C |
Packaging |
Tray |
Published |
2003 |
Series |
RoboClock™ |
JESD-609 Code |
e0 |
Pbfree Code |
no |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
100 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Additional Feature |
CONFIGURABLE AS SINGLE ENDED TTL ALSO |
Subcategory |
Clock Drivers |
Technology |
TTL |
Voltage - Supply |
2.97V~3.63V |
Terminal Position |
BOTTOM |
Terminal Form |
BALL |
Peak Reflow Temperature (Cel) |
220 |
Number of Functions |
1 |
Supply Voltage |
3.3V |
Base Part Number |
CY7B994 |
Output |
LVTTL |
Pin Count |
100 |
Number of Outputs |
18 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.63V |
Supply Voltage-Min (Vsup) |
2.97V |
Number of Circuits |
1 |
Nominal Supply Current |
250mA |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVPECL, LVTTL |
Ratio - Input:Output |
4:18 |
Max I(ol) |
0.03 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.5 ns |
Propagation Delay (tpd) |
0.5 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.8 ns |
Radiation Hardening |
No |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Lead Free |
CY7B994V-5BBC Overview
It is packaged using the Tray method since it is a clock IC. Embedded in the 100-LBGA package is this Clock PLL. The frequency generator is capable of withstanding a maximum temperature of 220 during reflowing. It contains 100 terminations that can be found in frequency synthesizer. Clock generator ics require a voltage of 3.3V. It is designed that the Clock PLL's input should be LVPECL, LVTTL. To access the full performance of the electronic component, 1 circuits are implemented. Providing a maximum frequency of 200MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage this clock generator would take is 3.63V. It is safe to use this frequency synthesizer with a supply voltage above 2.97V. As long as there are 2.97V~3.63V supply voltages provided, clock generator ic should work. Based on test statistics, ambient temperature should be set at 0°C~70°C. It's compatible with LVTTL logic levels. It is possible to classify this electronic component as a Clock Buffer, Fanout Distribution. It is a 100-bit IC that is designed for microprocessors specifically. Related electrical parts can be found for the base part number CY7B994. There is an available 100 pin on the PLL. The maximum supply voltage that analog clock generator can handle is 3.3V. A Clock Drivers clock generator is essentially what this device is. With CONFIGURABLE AS SINGLE ENDED TTL ALSO, this clock generator produces better clock signals. This clock generator is a member of RoboClock? series. The frequency synthesizer features 18 signal outputs to ensure as high a frequency as possible. Low timing skew is provided by this analog clock generator at maximum 0.8 ns. By searching for the 7B family, it is possible to find similar electrical components.
CY7B994V-5BBC Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5BBC Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5BBC Clock Generators applications.
- Coherent detection of the signal
- Simple clock clean-up circuits
- Ultrasound diagnosis
- Tracking filters
- Myriad digital applications
- Aerospace and defense
- Melting
- Multiplexing communication
- Precision auxiliary angle deflection measurement
- Frequency synthesis