CY7B994V-5BBCT
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Technology | TTL |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 220 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | not_compliant |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Propagation Delay | 200 ps |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Lead Free |
CY7B994V-5BBCT Overview
The Tape & Reel (TR) method is used for packaging clock ICs. The 100-LBGA package includes this clock generator. The frequency generator is capable of withstanding a maximum temperature of 220 during reflowing. In it, there are 100 terminations to be found. This time clock generator should be voltaged at 3.3V. As the Clock PLL's input, LVPECL, LVTTL is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. Providing a maximum frequency of 200MHz, this clock-based RF synthesizer is suitable for a variety of applications. The Surface Mount allows this electrical component to be easily installed on the panel. The maximal supply voltage this clock generator would take is 3.63V. For safety reasons, this frequency generator's supply voltage should remain above 2.97V. This clock PLL works with a supply voltage of 2.97V~3.63V. The temperature should be set at 0°C~70°C to ensure reliable performance. This is a clock generator compatible with LVTTL logic levels. Clock Buffer, Fanout Distribution is the type of electrical part that this component is classified as. In this IC, a 100-bit frequency generator is designed specifically for use in microprocessors. These related electrical parts are available for the base part number CY7B994. It is possible to connect to the PLL via 100 pins. The maximum supply voltage that analog clock generator can handle is 3.3V. As a result, it is commonly classified as a type of Clock Drivers clock PLL. For better clock signal output, this clock PLL is featured with CONFIGURABLE AS SINGLE ENDED TTL ALSO. RoboClock? series electronic parts are used in this part. Clock PLL has 18 signal outputs to maximi18e output frequency. Low timing skew is provided by this analog clock generator at maximum 0.8 ns. This clock generator belongs to the family of 7B.
CY7B994V-5BBCT Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5BBCT Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5BBCT Clock Generators applications.
- HDD recorders
- Closed circuit systems
- Aerospace and defense
- FSK demodulators
- Deep space exploration
- Time to digital converters
- Coherent detection of the signal
- Pulsed digital systems
- Broadcast communication
- PCI express cards
