CY7B994V-5BBXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LBGA |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2003 |
| Series | RoboClock™ |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | CONFIGURABLE AS SINGLE ENDED TTL ALSO |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B994 |
| Output | LVTTL |
| Pin Count | 100 |
| Number of Outputs | 18 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 250mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVPECL, LVTTL |
| Ratio - Input:Output | 4:18 |
| Max I(ol) | 0.002 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.8 ns |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B994V-5BBXI Overview
As a clock IC, it uses the Tray package. The 100-LBGA package contains this clock generator. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are a total of 100 terminations in this file. This electronic frequency generator requires a voltage of 3.3V. As the Clock PLL's input, LVPECL, LVTTL is designed to be used in order to generate the clock signal. It is possible to access the full performance of the electrical part by implementing 1 circuits. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. This component can be conveniently installed on the panel thanks to the Surface Mount. The maximal supply voltage (Vsup) reaches 3.63V. In order to maintain safety, this frequency generator should be supplied with voltages above 2.97V. Clock generator ic works with 2.97V~3.63V. Based on test statistics, ambient temperature should be set at -40°C~85°C. It's compatible with LVTTL logic levels. As far as this electronic part is concerned, it can be classified as a Clock Buffer, Fanout Distribution component. An IC that generates clocks specifically for microprocessors, this clock PLL is 100-bits in si100e. It is possible to find its related electronic parts by searching for the base part number CY7B994. The frequency generator is equipped with 100 pins. Time clock generator is capable of handling a voltage of 3.3V. In general, this clock PLL is considered a Clock Drivers device. In order to provide better clock signal output, this frequency synthesizer is equipped with CONFIGURABLE AS SINGLE ENDED TTL ALSO. It is part of the RoboClock? series of electronic components. 18 signal outputs allow for maximi18ation of output frequency. Low timing skew is offered by this RF synthesizer at maximum 0.8 ns. When searching for parts of the 7B family, similar electronic components will be found.
CY7B994V-5BBXI Features
Available in the 100-LBGA
Supply voltage of 3.3V
Operating supply voltage of 3.3V
CY7B994V-5BBXI Applications
There are a lot of Cypress Semiconductor Corp CY7B994V-5BBXI Clock Generators applications.
- Small signal recovery
- Multi-function printers
- Radar
- High-frequency induction heating
- Clock signals to the high-speed Digital RF circuits
- Instrument
- Reference signals to RF systems
- Aerospace and defense
- PCI express cards
- Wireless base station for LTE, LTE-advanced
