Parameters |
Family |
7B |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:8 |
Max I(ol) |
0.024 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.25 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.65 ns |
Duty Cycle |
52 % |
Length |
7mm |
Width |
7mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
32-TQFP |
Surface Mount |
YES |
Number of Pins |
32 |
Operating Temperature |
0°C~70°C |
Packaging |
Tape & Reel (TR) |
Published |
2013 |
Series |
RoboClock™ |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
32 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES WITH 3.3V SUPPLY |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.375V~3.63V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
CY7B9950 |
Output |
LVTTL |
Pin Count |
32 |
Number of Outputs |
8 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
2.625V |
Supply Voltage-Min (Vsup) |
2.375V |
Number of Circuits |
1 |
Quiescent Current |
2mA |
Frequency (Max) |
200MHz |
CY7B9950AXCT Overview
Clock generator is packaged in the way of Tape & Reel (TR). This clock generator is embedded in the 32-TQFP package. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. It contains 32 terminations that can be found in frequency synthesizer. Basically, a voltage of 2.5V should be applied to this electronic frequency generator. A clock generator's input is called LVCMOS, LVTTL and it is designed as the input for this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. Using this clock-based frequency synthesizer, you can achieve a maximum frequency of 200MHz. Thanks to the Surface Mount, this electric component can easily be installed on a panel. 2.625V would be the maximum supply voltage for this clock generator. Safety considerations dictate that the supply voltage for this frequency synthesizer should be greater than 2.375V. Clock generators should operate with the voltage supply of 2.375V~3.63V. Statistics suggest that the ambient temperature be set at 0°C~70°C, which is what is estimated by the test. I would like to present to you a frequency synthesizer that is compatible with LVTTL logic levels. This electronic component can be classified into Clock Buffer, Fanout Distribution. The clock-generating IC is a 32-bit device designed specifically for microprocessors. This part number CY7B9950 is related to the following electrical components. There is a 32 pin that is available on the frequency synthesizers. RF synthesizers can handle a voltage of 3.3V as the supply voltage. A Clock Drivers clock generator is essentially what this device is. In order to provide better clock signal output, this frequency synthesizer is equipped with ALSO OPERATES WITH 3.3V SUPPLY. There is an electronic part in this series that belongs to the RoboClock? family. Clock PLL is configured with 8 output. Low timing skew is provided by this analog clock generator at maximum 0.65 ns. The 7B family of parts can be used to find electric parts that are similar to each other.
CY7B9950AXCT Features
Available in the 32-TQFP
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY7B9950AXCT Applications
There are a lot of Cypress Semiconductor Corp CY7B9950AXCT Clock Generators applications.
- Notebooks
- Wireless infrastructure
- Radar
- High-frequency induction heating
- Signal generator
- Deep space exploration
- Set-top boxes
- FPGA and processor clocks
- Picocells, femtocells and small cells
- Local oscillator source in receiver