CY7B9950AXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES WITH 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.375V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B9950 |
| Output | LVTTL |
| Pin Count | 32 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.625V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Number of Circuits | 1 |
| Quiescent Current | 2mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.024 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.65 ns |
| Duty Cycle | 52 % |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B9950AXI Overview
A clock integrated circuit is packaged in a Tray-shaped package because it is for use as a clock. The 32-TQFP package embeds this Clock PLL. The peak reflow temperature (Cel) amounts to 260 to be essentially indestructible. There are 32 terminations found in this file. This electronic frequency generator requires a voltage of 2.5V. In this clock generator, LVCMOS, LVTTL is used as the input to the clock. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. 200MHz is the maximal value for normal operation. PLL clock is mounted in the way of Surface Mount. Clock PLL is capable of receiving a maximum of 2.625V as a supply voltage. The supply voltage for this frequency synthesizer should be kept above 2.375V for safety considerations. Clock generator ic works with 2.375V~3.63V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. The frequency synthesizer in this product is compatible with all levels of LVTTL logic. As far as this electronic part is concerned, it can be classified as a Clock Buffer, Fanout Distribution component. In particular, this clock PLL is designed to be used with microprocessors. According to the base part number, its related parts can be founded. PF synthesizers is equipped with 32 pins. The supply voltage should be maintained at 3.3V for high efficiency. In general, this clock PLL is considered a Clock Drivers device. For better clock signal output, this clock PLL is featured with ALSO OPERATES WITH 3.3V SUPPLY. The output frequency is magnified as high as possible with 8 signal outputs. At maximum 0.65 ns, this analog clock generator has low timing skew. This PLL belongs to the family of 7B.
CY7B9950AXI Features
Available in the 32-TQFP
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY7B9950AXI Applications
There are a lot of Cypress Semiconductor Corp CY7B9950AXI Clock Generators applications.
- Instrument
- Wireless base station for LTE, LTE-advanced
- Jitter reduction
- Frequency synthesis
- Cable television converter boxes
- VSAT (Small Ground Satellite Station)
- Frequency Modulation (FM) stereo decoders
- Local oscillators (LOs)
- Antenna automatic tracking
- Radar
