CY7B9950AXIT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-TQFP |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | RoboClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Clock Buffer, Fanout Distribution |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | ALSO OPERATES WITH 3.3V SUPPLY |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.375V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B9950 |
| Output | LVTTL |
| Pin Count | 32 |
| Number of Outputs | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 2.625V |
| Supply Voltage-Min (Vsup) | 2.375V |
| Number of Circuits | 1 |
| Quiescent Current | 2mA |
| Frequency (Max) | 200MHz |
| Family | 7B |
| Input | LVCMOS, LVTTL |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.024 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.25 ns |
| Divider/Multiplier | Yes/Yes |
| fmax-Min | 200 MHz |
| Same Edge Skew-Max (tskwd) | 0.65 ns |
| Duty Cycle | 52 % |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B9950AXIT Overview
As a clock IC, PLLs is packaged using the Tape & Reel (TR) method. 32-TQFP contains this Clock PLL. This clock generator ic can sustain a maximum temperature of 260 during reflowing. It contains a total of 32 terminations within RF synthesizer. For this clock generator ic, a voltage of 2.5V is required. The input of this clock generator is designed to be LVCMOS, LVTTL. To access the electronic component's full performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. The Surface Mount allows the electrical component to be installed conveniently on the panel. The maximal supply voltage (Vsup) reaches 2.625V. There should be a voltage supply above 2.375V for this frequency generator in order to ensure its safety. Clock generators should operate with the voltage supply of 2.375V~3.63V. Statistics suggest that the ambient temperature be set at -40°C~85°C, which is what is estimated by the test. A frequency synthesizer which is compatible with the LVTTL logic levels is presented here. This is an electronic part that can be classified as a Clock Buffer, Fanout Distribution in this case. Clock PLL is equipped with 32 pin count. According to the base part number CY7B9950, its related parts can be found. PLL is designed with 32 pins. Supply voltage 3.3V is what clock generator can handle. The device is usually classified as a type of Clock Drivers device. ALSO OPERATES WITH 3.3V SUPPLY is included in this frequency generator to enhance clock signal output. This electronic part is a member of the RoboClock? series. The output frequency can be magnified as high as possible with the assistance of 8 signal outputs. This clock generator offers low timing skew at 0.65 ns Max. If you search for the 7B family of parts, you will be able to find similar electrical parts.
CY7B9950AXIT Features
Available in the 32-TQFP
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY7B9950AXIT Applications
There are a lot of Cypress Semiconductor Corp CY7B9950AXIT Clock Generators applications.
- FM demodulation networks for FM operations
- Precision auxiliary angle deflection measurement
- Camera systems
- Integrated phase noise in aerospace systems
- Clock synchronization
- Pulsed digital systems
- Signal generator
- PMR (Professional Mobile Radio)
- Wireless base station for LTE, LTE-advanced
- Closed circuit systems
