Parameters |
Mounting Type |
Surface Mount |
Package / Case |
44-TQFP |
Surface Mount |
YES |
Number of Pins |
44 |
Operating Temperature |
0°C~70°C |
Packaging |
Tray |
Published |
2007 |
Series |
RoboClock™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
44 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES WITH 3.3V SUPPLY |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.25V~3.6V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
CY7B995 |
Output |
LVTTL |
Pin Count |
44 |
Number of Outputs |
8 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
2.625V |
Supply Voltage-Min (Vsup) |
2.375V |
Number of Circuits |
1 |
Quiescent Current |
2mA |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:8 |
Max I(ol) |
0.024 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.25 ns |
Propagation Delay (tpd) |
0.25 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.65 ns |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B995AXC Overview
In order to package it as a clock IC, the Tray package is used. In the 44-TQFP package, there is an embedded clock generator. The frequency generator is capable of withstanding a maximum temperature of 260 during reflowing. 44 terminations can be found in frequency synthesizer. This electronic frequency generator requires a voltage of 2.5V. It is designed that the Clock PLL's input should be LVCMOS, LVTTL. 1 circuits are used to achieve clock PLL's superior flexibility. An upper frequency limit of 200MHz Max can be achieved with this clock-based frequency synthesizer. Thanks to the Surface Mount, this electric component can easily be installed on a panel. The maximal supply voltage (Vsup) reaches 2.625V. For safety reasons, this frequency generator's supply voltage should remain above 2.375V. This clock PLL works with a supply voltage of 2.25V~3.6V. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. The RF synthesizer is compatible with LVTTL logic levels. As far as electrical parts go, this component can be classified as a Clock Buffer, Fanout Distribution component. An IC that generates clocks specifically for microprocessors, this clock PLL is 44-bits in si44e. The related electrical components for the base part number CY7B995 can be found below. There are a number of 44 pins that are available on the clock generators. In terms of the supply voltage, PLL clock can handle 3.3V volts. As a result, it is commonly classified as a type of Clock Drivers clock PLL. For better clock signal output, this clock PLL is featured with ALSO OPERATES WITH 3.3V SUPPLY. This clock generator is a member of RoboClock? series. 8 signal outputs allow for maximi8ation of output frequency. At 0.65 ns Max, this clock generator offers low timing skew. If you search for the 7B family of electronic parts, you will be able to find similar parts.
CY7B995AXC Features
Available in the 44-TQFP
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY7B995AXC Applications
There are a lot of Cypress Semiconductor Corp CY7B995AXC Clock Generators applications.
- Signal frequency synthesis circuits
- Notebooks
- Signal demodulation
- PMR (Professional Mobile Radio)
- Line cards used in telephone exchange
- Reference signals to RF systems
- Simple clock clean-up circuits
- Mechanical devices
- Small signal recovery
- Local oscillator source in receiver