Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold, Tin |
Mounting Type |
Surface Mount |
Package / Case |
44-TQFP |
Surface Mount |
YES |
Number of Pins |
44 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Published |
2007 |
Series |
RoboClock™ |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
44 |
ECCN Code |
EAR99 |
Type |
Clock Buffer, Fanout Distribution |
Terminal Finish |
Matte Tin (Sn) |
Additional Feature |
ALSO OPERATES WITH 3.3V SUPPLY |
Subcategory |
Clock Drivers |
Voltage - Supply |
2.25V~3.6V |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
2.5V |
Time@Peak Reflow Temperature-Max (s) |
20 |
Base Part Number |
CY7B995 |
Output |
LVTTL |
Pin Count |
44 |
Number of Outputs |
8 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
2.625V |
Supply Voltage-Min (Vsup) |
2.375V |
Number of Circuits |
1 |
Quiescent Current |
2mA |
Frequency (Max) |
200MHz |
Family |
7B |
Input |
LVCMOS, LVTTL |
Ratio - Input:Output |
1:8 |
Max I(ol) |
0.024 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.25 ns |
Propagation Delay (tpd) |
0.25 ns |
Divider/Multiplier |
Yes/Yes |
fmax-Min |
200 MHz |
Same Edge Skew-Max (tskwd) |
0.65 ns |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B995AXIT Overview
As a clock IC, it uses the Tape & Reel (TR) package. The 44-TQFP package includes this clock generator. Frequency generator can maintain a maximum temperature of 260 under reflowing conditions. 44 terminations can be found in frequency synthesizer. For this clock generator ic, a voltage of 2.5V is required. LVCMOS, LVTTL is designed for clock generator's input. For a full understanding of the electronic part's performance, 1 circuits are implemented. RF synthesizers based on this clock provide frequencies up to 200MHz maximum. The Surface Mount allows this electrical component to be easily installed on the panel. This clock generator would require a maximum supply voltage of 2.625V. The supply voltage (Vsup) should be kept above 2.375V for normal operation. Clock generator ic works with 2.25V~3.6V. Based on test statistics, ambient temperature should be set at -40°C~85°C. There are several logic levels in LVTTL logic that can be used with this clock generator. A Clock Buffer, Fanout Distribution is a classification for the electronic part in question. This clock-generating IC is a 44-bit device designed explicitly for microprocessors. The related electronic parts of part number CY7B995 are listed below. There are a number of 44 pins that are available on the clock generators. Time clock generator is capable of handling a voltage of 3.3V. A Clock Drivers clock generator is essentially what this device is. For better clock signal output, this clock PLL is featured with ALSO OPERATES WITH 3.3V SUPPLY. RoboClock? series electronic parts are used in this part. Clock PLL has 8 signal outputs to maximi8e output frequency. This clock generator offers low timing skew at 0.65 ns Max. The 7B family of parts can be used to find electronic parts that are similar to each other.
CY7B995AXIT Features
Available in the 44-TQFP
Supply voltage of 2.5V
Operating supply voltage of 3.3V
CY7B995AXIT Applications
There are a lot of Cypress Semiconductor Corp CY7B995AXIT Clock Generators applications.
- Motor speed controls
- Wireless infrastructure
- FPGA and processor clocks
- Antenna automatic tracking
- Radiotelephones
- Picocells, femtocells and small cells
- Infotainment systems
- Automatic control system test
- Melting
- Local oscillators (LOs)