banner_page

CY7C372I-100JC

1.27mm PMIC 44 Pin 5V LQFP


  • Manufacturer: Cypress Semiconductor
  • Nocochips NO: 217-CY7C372I-100JC
  • Package: LQFP
  • Datasheet: -
  • Stock: 779
  • Description: 1.27mm PMIC 44 Pin 5V LQFP (Kg)

Details

Tags

Parameters
Mount Surface Mount
Package / Case LQFP
Number of Pins 44
Packaging Bulk
JESD-609 Code e0
Number of Terminations 44
Terminal Finish Tin/Lead (Sn/Pb)
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Subcategory Programmable Logic Devices
Technology CMOS
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 225
Supply Voltage 5V
Terminal Pitch 1.27mm
Reach Compliance Code not_compliant
Time@Peak Reflow Temperature-Max (s) 30
Pin Count 44
Qualification Status Not Qualified
Operating Supply Voltage 5V
Temperature Grade COMMERCIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Number of I/O 37
Memory Type FLASH
Clock Frequency 80MHz
Propagation Delay 12 ns
Organization 3 DEDICATED INPUTS, 32 I/O
Number of Logic Blocks (LABs) 4
Output Function MACROCELL
Number of Macro Cells 64
JTAG BST NO
Number of Dedicated Inputs 3
In-System Programmable YES
Length 16.6116mm
Width 16.6116mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

CY7C372I-100JC Overview


This network has 64macro cells, which are cells that provide radio coverage provided by a high-power cell site (tower, antenna, mast).The item is packaged with LQFP.The device is programmed with 37 I/Os.It is programmed to terminate devices at [0].As the terminal position of this electrical part is [0], it serves as an important access point for passengers or freight.There is 5V voltage supply for this device.It belongs to the family [0].The chip should be packaged by Bulk.It is programmed with 44 pins.In order to maintain high efficiency, the supply voltage should be maintained at [0].For storing data, it is recommended to use [0].In this case, Surface Mountis used to mount the electronic component.The pins are [0].A maximum voltage of 5.25Vis required for operation.In order for it to operate, a supply voltage of 4.75Vis required.It is recommended that the operating temperature be greater than 0°C.It is recommended that the operating temperature be below 70°C.The logic block consists of 4 l logic blocks (LABs).There are 3 dedicated inputs used to detect the status of input signals.clock frequency should not exceed [0].

CY7C372I-100JC Features


LQFP package
37 I/Os
44 pin count
44 pins
4 logic blocks (LABs)

CY7C372I-100JC Applications


There are a lot of Cypress Semiconductor CY7C372I-100JC CPLDs applications.

  • Storage Cards and Storage Racks
  • State machine control
  • Complex programmable logic devices
  • Power up sequencing
  • LED Lighting systems
  • Multiple Clock Source Selection
  • White goods (Washing, Cold, Aircon ,...)
  • DDC INTERFACE
  • Pattern recognition
  • Synchronous or asynchronous mode

Write a review

Note: HTML is not translated!
    Bad           Good