CY7C374I-83AC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 100 |
| JESD-609 Code | e0 |
| Number of Terminations | 100 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | Programmable Logic Devices |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 125MHz |
| Pin Count | 100 |
| Operating Supply Voltage | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Number of I/O | 64 |
| Memory Type | FLASH |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 15 ns |
| Frequency (Max) | 125MHz |
| Organization | 1 DEDICATED INPUTS, 64 I/O |
| Number of Logic Blocks (LABs) | 8 |
| Output Function | MACROCELL |
| Number of Macro Cells | 128 |
| JTAG BST | NO |
| Number of Dedicated Inputs | 1 |
| In-System Programmable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
CY7C374I-83AC Overview
There are 128 macro cells in the network, which are high-power cell sites that provide radio coverage (tower, antenna, or mast) for a mobile phone network.The item is packaged with TQFP.In this case, there are 64 I/Os programmed.It is programmed that device terminations will be 100 .This electrical component has a terminal position of 0.There is 5V voltage supply for this device.There is a part included in Programmable Logic Devices.It is equipped with 100 pin count.It is recommended that the supply voltage be kept at 5Vto maximize efficiency.FLASH is adopted for storing data.A Surface Mountis mounted on this electronic component.There are 100 pins on the device.There is a maximum supply voltage of 5.25Vwhen the device is operating.With a minimal supply voltage of [0], it operates.There can be 125MHz frequency achieved.In order to operate, the temperature should be higher than 0°C.A temperature lower than 70°Cis recommended for operation.There are 8logic blocks (LABs) that make up its basic building block.Input signals are detected using 1dedicated inputs.There should be a lower maximum frequency than 125MHz.
CY7C374I-83AC Features
TQFP package
64 I/Os
100 pin count
100 pins
8 logic blocks (LABs)
CY7C374I-83AC Applications
There are a lot of Cypress Semiconductor CY7C374I-83AC CPLDs applications.
- Custom shift registers
- Configurable Addressing of I/O Boards
- Interface bridging
- ROM patching
- Digital systems
- Programmable power management
- Network Interface Card (NIC) and Host Bus Adapter (HBA)
- Code converters
- Voltage level translation
- Page register
