CY7C4255V-10ASXC
| Parameters | |
|---|---|
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| Series | CY7C |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | 7C4255 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 144K 8K x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Access Time | 8ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Organization | 8KX18 |
| Memory Width | 18 |
| Density | 144 kb |
| Standby Current-Max | 0.004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7C4255V-10ASXC Overview
The 64-LQFP package contains FIFO memory chip.Tube case is used for packaging.The FIFO chips have a memory of 144K 8K x 18 that can be used to store applications and data.The temperature should be kept at 0°C~70°C to ensure reliable operation.The mounting type of the FIFO memory is Surface Mount .Operation is based on a supply voltage of 3V~3.6V .It is part of the CY7C series of memory logics.The recommended mounting way is Surface Mount .I believe it belongs to the 7C4255 family of numbers.When the supply voltage is 3.3V there is the possibility of high efficiency.I found that it has 64 terminations in FIFO means.64 pins are used for operation.For its operation, 30mA is the maximum current required.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.The gadget is self-contained and can be found in FIFOs .This part is equipped with an IC of type OTHER FIFO memory.With a frequency of 100MHz , it exhibits good accuracy.Additionally, this FIFO memory can be used to generate RETRANSMIT .It is set to 3.6V volts for the FIFO memory IC's maximum supply voltage.To ensure normal operation, make sure the supply voltage (Vsup) is above 3V .By using 2 circuits, FIFO memory chip achieves enhanced flexibility.
CY7C4255V-10ASXC Features
144K 8K x 18 memory size
CY7C series
Best part number of 7C4255
FIFOs category
CY7C4255V-10ASXC Applications
There are a lot of Cypress Semiconductor Corp CY7C4255V-10ASXC FIFOs Memory applications.
- Telecommunication
- Down-Hole Energy Drilling
- Laser Receiver System
- Optical memories
- Application that requires re-writable nonvolatile parameter memory
- Firmware loaders
- Controlled baseline
- Medical Monitoring Device
- IP Radio
- Test Equipment
