CY7C4261-15JC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-LCC (J-Lead) |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1997 |
| Series | CY7C |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN LEAD |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 7C4261 |
| Function | Synchronous |
| Current - Supply (Max) | 35mA |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Memory Size | 144K 16K x 9 |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Access Time | 10ns |
| Data Bus Width | 9b |
| Organization | 16KX9 |
| Output Characteristics | 3-STATE |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| Retransmit Capability | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 15 ns |
| Height | 3.556mm |
| Length | 11.51mm |
| Width | 14.0462mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
CY7C4261-15JC Overview
FIFO memory chip is contained in the 32-LCC (J-Lead) package.The package comes in a case of Tube .There is a 144K 16K x 9 MB memory on the FIFO chips, which can be used to store both applications and data.To ensure reliable operation, the temperature should be regulated to 0°C~70°C .There is a mounting type of Surface Mount on the FIFO memory.To operate, the FIFO products requires a voltage supply of 4.5V~5.5V .The CY7C series comprises this memory logic.35mA is memory IC's maximum operating supply current.Surface Mount is memory IC's recommended mounting method.The 7C4261 family of integers consists of this type.A supply voltage of 5V allows for high efficiency.A total of 32 terminations can be found in FIFO means.FIFO design has 32 operation pins.FIFO design requires 35mA amps of current to operate.In FIFOs , there is a self-contained gadget.This part is equipped with an IC of type OTHER FIFO memory.When the frequency is set to 66.7MHz , the system can maintain good accuracy.In normal circumstances, the component has 5V power supplies.The gadget can also generate a value of RETRANSMIT .There is a FIFO memory IC's maximum supply voltage of 5.5V .Maintain the supply voltage (Vsup) above 4.5V for normal operation.
CY7C4261-15JC Features
144K 16K x 9 memory size
CY7C series
Best part number of 7C4261
FIFOs category
CY7C4261-15JC Applications
There are a lot of Cypress Semiconductor Corp CY7C4261-15JC FIFOs Memory applications.
- SPD for DDR3 Memory Modules
- TVs
- General Data Collection Applications at Extreme High-Temperatures
- SPI Bus Flash Memory Devices
- Programmable Logic Controller
- Measurement Equipment
- SPI Bus Flash Memory Device
- Network switching/routing
- Emulators
- Digital buffering
