CY7C4275V-15ASXC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-LQFP |
| Number of Pins | 64 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tray |
| Published | 1996 |
| Series | CY7C |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RETRANSMIT |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Base Part Number | 7C4275 |
| Function | Synchronous |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Circuits | 2 |
| Memory Size | 576K 32K x 18 |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
| Max Supply Current | 30mA |
| Access Time | 10ns |
| Data Bus Width | 18b |
| Direction | Unidirectional |
| Memory Width | 18 |
| Density | 576 kb |
| Standby Current-Max | 0.004A |
| Parallel/Serial | PARALLEL |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7C4275V-15ASXC Overview
FIFO memory chip is contained in the 64-LQFP package.In terms of packaging, it comes in Tray cases.It is possible to store data and applications on the FIFO chips as they have 576K 32K x 18 in their memory.A temperature regulation of 0°C~70°C is crucial for reliable operation.There is a mounting type of Surface Mount on the FIFO memory.A voltage supply of 3V~3.6V is needed to operate it.It is a member of the CY7C series .Surface Mount is recommended as the mounting method.Memory IC is a member of the 7C4275 family.When the supply voltage is 3.3V there is the possibility of high efficiency.The number of terminations in FIFO means is 64 .In the case of the operation pins, they are 64 pins.In order for FIFO design to operate, FIFO design requires a maximum current of 30mA .When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.The gadget is self-contained and can be found in FIFOs .It has a OTHER FIFO memory type IC.A frequency of 66.7MHz is sufficient to maintain good accuracy.It is also possible to generate RETRANSMIT using this FIFO memory.A FIFO memory IC's maximum supply voltage of 3.6V is set for Vsup.A voltage above 3V is necessary for normal operation.By using 2 circuitry, FIFO memory chip has enhanced flexibility.
CY7C4275V-15ASXC Features
576K 32K x 18 memory size
CY7C series
Best part number of 7C4275
FIFOs category
CY7C4275V-15ASXC Applications
There are a lot of Cypress Semiconductor Corp CY7C4275V-15ASXC FIFOs Memory applications.
- A/D output buffers
- Optical memories
- IP Radio
- Programmable Logic Controller
- Networking
- SPI Bus Flash Memory Devices
- Cardiac Monitoring Device
- Consumer Systems
- Alarm System
- Character generators
