CY8C20160-LDX2I
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2007 |
| Series | CapSense® Express™ |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Buttons |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | SRAM IS ORGANISED AS 512MB |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Voltage - Supply | 2.4V~5.25V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 16 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 2.4V |
| Interface | I2C |
| Operating Supply Current | 1.5mA |
| Nominal Supply Current | 1.5mA |
| RAM Size | 512B |
| Memory Type | ROMless |
| Peripherals | I2C, PWM |
| Watchdog Timer | Yes |
| Data Rate | 400 kbps |
| Number of Inputs | Up to 6 |
| Organization | 2KX1 |
| Memory Width | 1 |
| Memory Density | 2048 bit |
| Number of GPIO | 6 |
| Proximity Detection | No |
| LED Driver Channels | Up to 6 |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY8C20160-LDX2I Overview
Packaged in materials from Tray. Surface Mount is needed to mount it on the PCB. Its low package cost accounts for much of 16-UFQFN's popularity in the electronic industry. 2.4V~5.25V Supply Voltage is required for the device to operate normally. There are inputs of Up to 6. Standard grade applications fall under Type Buttons. The temperature at which it operates should always be -40°C~85°C. Featuring the best cost-down performance ratio on the market, the CapSense? Express? Series is the most cost-effective option. In LED drivers, channels Up to 6 are used. The current supply of the device has been set to 1.5mA. This is built using terminations of the 16 axis. 16 remains the pin number of the component. 3V-volt power is always supplied to the component. 2.4V must be greater than Vsup, the supply voltage. The Supply Voltage (Vsup) reaches maximum value when 5.25V is reached. It is 260 that represents the peak of the reflow temperature. A 16 pin is provided for specific uses. Among the other features are SRAM IS ORGANISED AS 512MB and B.
CY8C20160-LDX2I Features
16-UFQFN package
Up to 6 LED driver channels
16 pins
Addtional features of SRAM IS ORGANISED AS 512MB
CY8C20160-LDX2I Applications
There are a lot of Cypress Semiconductor Corp CY8C20160-LDX2I Capacitive Sensors applications.
- Collision Avoidance
- Material Stack Height
- MP3 players
- PC Peripherals
- Battery powered PIR sensors solutions
- Nolebooks
- Remote and Direct Liquid Level Sensor
- Television controls
- Gesture Recognition
- Remote Controls
