CY8C3445LTI-081
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 68-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 68 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2005 |
| Series | PSOC® 3 CY8C34xx |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 68 |
| ECCN Code | 3A991.A.3 |
| Subcategory | Other uPs/uCs/Peripheral ICs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY8C3445 |
| Pin Count | 68 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 2/5V |
| Supply Voltage-Min (Vsup) | 1.71V |
| Interface | EBI/EMI, I2C, LIN, SPI, UART, USART, USB |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 38 |
| RAM Size | 4K x 8 |
| Voltage - Supply (Vcc/Vdd) | 1.71V~5.5V |
| Core Processor | 8051 |
| Peripherals | CapSense, DMA, LCD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 8-Bit |
| Program Memory Size | 32KB 32K x 8 |
| Connectivity | EBI/EMI, I2C, LINbus, SPI, UART/USART, USB |
| Data Converter | A/D 16x12b; D/A 2x8b |
| Watchdog Timer | Yes |
| Data Bus Width | 8b |
| Number of Timers/Counters | 4 |
| EEPROM Size | 1K x 8 |
| Boundary Scan | YES |
| Number of Programmable I/O | 48 |
| Bus Compatibility | I2C; USB |
| UV Erasable | N |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY8C3445LTI-081 Overview
To save space, it is included in the 68-VFQFN Exposed Pad package. The way of Surface Mount is used to mount it. It comes in a Tray package. It is equipped with a 8051 core processor. When working, the temperature should be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. A total of 38 I/Os are available on this device. A component with the same part number as CY8C3445 can be compared to other similar components. At QUAD, its terminals are located. As far as terminations are concerned, there are 68 terminations present. The PSOC? 3 CY8C34xx series includes this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. The structure is constructed from 68 pins. On it, there are 68 pins. It falls under the category of Other uPs/uCs/Peripheral ICs. Using the devices' 32kB memory size, you can store programs and data. A 2/5V source of power is being used to run it. This device works well at 50MHz frequency when it is operating at a high rate of efficiency. 4 timer/counters are present. The number 48 represents the number of programmable I/O ports on the board. In order to ensure normal operation, the supply voltage (Vsup) must remain above 1.71V. There is an oscillator type Internal used in this circuit.
CY8C3445LTI-081 Features
68-VFQFN Exposed Pad package
Mounting type of Surface Mount
Other uPs/uCs/Peripheral ICs subcategory
CY8C3445LTI-081 Applications
There are a lot of Cypress Semiconductor Corp CY8C3445LTI-081 Microcontroller applications.
- Telephone sets
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Projector
- Medical instruments chromatographs
- Smartphone
- DCS control intelligent sensor
- Safety -airbags, automatic braking system (ABS)
- Heater/Fan
- Laminators
- Fabric
