CYF0018V33L-133BGXI
| Parameters | |
|---|---|
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 209 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Function | Synchronous |
| Supply Voltage-Max (Vsup) | 1.575V |
| Power Supplies | 1.51.8V |
| Supply Voltage-Min (Vsup) | 1.425V |
| Memory Size | 18M 512K x 36 |
| Element Configuration | Dual |
| Supply Current-Max | 0.6mA |
| Access Time | 10ns |
| Data Bus Width | 36b |
| Direction | Unidirectional |
| Organization | 512KX36 |
| Memory Width | 36 |
| Density | 18 Mb |
| Max Frequency | 133MHz |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Expansion Type | Width |
| Cycle Time | 7.5 ns |
| Height Seated (Max) | 1.96mm |
| Length | 22mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 209-BGA |
| Number of Pins | 209 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2009 |
CYF0018V33L-133BGXI Overview
You can find FIFO memory chip in the 209-BGA package.It comes in a Tray package.The FIFO chips have a memory of 18M 512K x 36 that can be used to store applications and data.It is advisable to regulate the temperature to -40°C~85°C to ensure reliable operation.Mounting type Surface Mount indicates that the FIFO memory is mounted.A voltage supply of 3V~3.6V is needed to operate it.Surface Mount is recommended as the mounting method.An input voltage of 1.5V results in high efficiency.209 terminations are contained in FIFO means.209 pins are the operation pins.It is contained within FIFOs .This part has a memory type of OTHER FIFO .There are normally 1.51.8V power supplies attached to the component.It is set to 1.575V volts for the FIFO memory IC's maximum supply voltage.The supply voltage (Vsup) should remain above 1.425V to ensure normal operation.
CYF0018V33L-133BGXI Features
18M 512K x 36 memory size
FIFOs category
CYF0018V33L-133BGXI Applications
There are a lot of Cypress Semiconductor Corp CYF0018V33L-133BGXI FIFOs Memory applications.
- MP3 Interface for Automobile
- Smart Meter
- Test Equipment
- Data
- Cardiac Monitoring Device
- Multimedia
- Routers
- Switches
- Multi-stage synchronizer
- Programmable Logic Controller
