D10DNFP
| Parameters | |
|---|---|
| Mount | DIN Rail |
| Housing Material | PC |
| Operating Temperature | -10°C~55°C |
| Published | 2009 |
| Series | D10 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Voltage - Supply | 12V~24V |
| Ingress Protection | NEMA 1 IEC IP50 |
| Depth | 35.9mm |
| Operating Supply Voltage | 24V |
| Output Configuration | NPN |
| Cable Length | 78.74 2m |
| Output Current | 150mA |
| Contact Current Rating | 150mA |
| Response Time | 500μs |
| Adjustment Type | Adjustable |
| Sensing Method | Fiber Optic |
| Connection Method | Cable |
| Light Source | Green LED, Red LED |
| Length | 68.1mm |
| Width | 10.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Ratings | IP50 |
D10DNFP Overview
Photoelectric sensors should be set at -10°C~55°C for reliable performance. If these electronic components are to work, they should receive 12V~24V voltage into the circuit or system. Photoelectric sensors are considered to have an optimal response time of 500μs. Photoelectric sensors require an output current of 150mA to operate. Optimal performance can be achieved by setting the supply voltage of the photoelectric sensor to zero.
D10DNFP Features
Response Time: 500μs
Operating Temperature: -10°C~55°C
D10 Series
D10DNFP Applications
There are a lot of Banner Engineering Corporation D10DNFP Photoelectric Sensors applications.
- Mechanical engineering
- Detecting colours
- Automatic doors
- Passive infrared sensors
- Checking objects on production lines or conveyors
- Luminescence sensors
- Counting small objects
- detect objects
- Automotive industry
- Zone scanners
