D24051QM96G4Q1

39ns, 32ns 130Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 4.5V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-D24051QM96G4Q1
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 982
Description: 39ns, 32ns 130Ohm DUAL Analog Switches BREAK-BEFORE-MAKE 74HCT4051 16 Pins 4.5V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	141.690917mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	130Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	4.5V
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HCT4051
Pin Count	16
Qualification Status	Not Qualified
Operating Supply Voltage	5V
Power Supplies	5V
Number of Channels	8
Number of Circuits	1
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	16μA
Propagation Delay	12 ns
Turn On Delay Time	55 ns
Logic Function	Demultiplexer, Multiplexer
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	4.5V~5.5V ±1V~5V
Supply Type	Single
Bandwidth	180MHz
Neg Supply Voltage-Nom (Vsup)	-4.5V
Turn-Off Delay Time	45 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	130Ohm
Min Dual Supply Voltage	1V
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	75 dB
Channel Capacitance (CS(off), CD(off))	5pF 25pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	39ns, 32ns
Channel-to-Channel Matching (ΔRon)	5 Ω
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Signal Current-Max	0.025A
Height	1.75mm
Length	9.9mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

D24051QM96G4Q1 Overview

As the electronic part is packed in 16-SOIC (0.154, 3.90mm Width), international shipping is convenient. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. Multiplexers and demultiplexers have the same number of circuits 8:1. Temperatures around -40°C~125°C TA are extended for operation. In total, 16 terminations have occurred. Due to its 8 channels, the electrical component produces high-quality output. A 4.5V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. It consists of 1 circuits. Try searching with 74HCT4051 if you're looking for variants. The internal resistance of this digital multiplexer is 130Ohm. The functions of 16 pins can be found in the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 4.5V. For this multiplexer to operate, 16μA current would be sufficient. If put voltage greater than 5.5V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 1V. Operating voltages of 5V are compatible with the electrical part. The 8 inputs need to be operated in order to work. A 180MHz-bandwidth can be used for data transfer. This is one of the Automotive, AEC-Q100 series.