D24066QM96G4Q1

24ns, 35ns SPST - NO 95Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74HCT4066 14 Pins 4.5V 14-SOIC (0.154, 3.90mm Width)

Manufacturer: Texas Instruments
Nocochips NO: 815-D24066QM96G4Q1
Package: 14-SOIC (0.154, 3.90mm Width)
Datasheet: -
Stock: 708
Description: 24ns, 35ns SPST - NO 95Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74HCT4066 14 Pins 4.5V 14-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Operating Supply Voltage	5V
Polarity	Non-Inverting
Power Supplies	5V
Number of Channels	4
Max Supply Voltage	5.5V
Min Supply Voltage	4.5V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Propagation Delay	18 ns
Turn On Delay Time	24 ns
Supply Type	Single
Bandwidth	200MHz
Turn-Off Delay Time	35 ns
On-State Resistance (Max)	95Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	24ns, 35ns
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-72dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Switch-on Time-Max	36ns
Switch-off Time-Max	53ns
Voltage - Supply, Single (V+)	4.5V~5.5V
Normal Position	NO
Signal Current-Max	0.25A
Height	1.75mm
Length	8.65mm
Width	3.91mm
Thickness	1.58mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-SOIC (0.154, 3.90mm Width)
Number of Pins	14
Weight	122.413241mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Series	Automotive, AEC-Q100
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	95Ohm
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	4.5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	74HCT4066
Pin Count	14
Qualification Status	Not Qualified

D24066QM96G4Q1 Overview

Shipping overseas is convenient due to the electrical component's packing in 14-SOIC (0.154, 3.90mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Extended operating temperature around -40°C~125°C TA. The total number of terminations is 14. This electronic part offers high-quality output due to its 4 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. Into the electrical component body are injected 14 pins. The analog switch ics are built using SPST - NO switching circuits. Use 74HCT4066 to search for variants of the digital switches. A 95Ohm internal resistance characterizes this multiplexer. Datasheets for 14 pin functions are available upon request. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 5.5V. An effective Single supply digital multiplexer. The lowest voltage the electronic part should receive is 4.5V. In order to operate this switch device, it would need a current of 2μA. Using only a single voltage supply, this analog switch requires 4.5V~5.5V voltage. When the digital multiplexer is charged above 2μA, damage can occur. 5V operating voltages are supported by the electronic component. 200MHz-bandwidths can be used to transfer data between multiplexers. This is one of the Automotive, AEC-Q100 series.