D24067IM96G4Q1
| Parameters | |
|---|---|
| Channel Capacitance (CS(off), CD(off)) | 5pF 50pF |
| On-state Resistance Match-Nom | 10Ohm |
| Switch Time (Ton, Toff) (Max) | 60ns, 55ns |
| Channel-to-Channel Matching (ΔRon) | 10 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 75ns |
| Switch-off Time-Max | 73ns |
| Voltage - Supply, Single (V+) | 4.5V~5.5V |
| Normal Position | NO |
| Signal Current-Max | 0.025A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Resistance | 180Ohm |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74HCT4067 |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 16 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 8μA |
| Number of Bits | 16 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 60 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Bandwidth | 89MHz |
| Supply Current-Max (Isup) | 0.08mA |
| Turn-Off Delay Time | 58 ns |
| On-State Resistance (Max) | 180Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 16:1 |
| Off-state Isolation-Nom | 75 dB |
D24067IM96G4Q1 Overview
As the electronic part is packed in 24-SOIC (0.295, 7.50mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. 16:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. Total terminations are 24. A high-quality output is provided by the electrical component's 16 channels. With a 5V voltage supply, the electrical component should be turned on and run. A key feature of the 24 series is the inclusion of this electronic part as part of its design. The multiplexer consists of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HCT4067. An switch multiplexer with 180Ohm internal resistance has a value of 180Ohm. Please refer to the datasheets for 24 pins functions. A analogue multiplexer of this type is a Multiplexer or Switches. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. The digital multiplexer has a low cost Single supply. 4.5V is the lowest voltage the electrical component should receive. It would be sufficient to run this analogue multiplexer with 8μA current. Using only a single voltage supply, this analog switch requires 4.5V~5.5V voltage. It is possible to transfer data over a 89MHz-bandwidth. 16-bits are supported. This is one of the Automotive, AEC-Q100 series.
D24067IM96G4Q1 Features
16 Channels
8μA Supply Current
Bandwidth: 89MHz
16-Bit
D24067IM96G4Q1 Applications
There are a lot of Texas Instruments D24067IM96G4Q1 Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- CSU
- E1 Network Equipment
- Data switching
- Central office
- Avionics
- Fiber to the Home
- Voice over IP/DSL – Integrated Access Devices, Smart
- Data Acquisition Systems
- Microprocessor Controlled Analog Systems
