DG1411EEQ-T1-GE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| JESD-30 Code | R-PDSO-G16 |
| Number of Channels | 1 |
| Number of Circuits | 4 |
| Input Voltage (Min) | -16.5V |
| Input Voltage (Max) | 16.5V |
| Voltage - Supply, Single/Dual (±) | 4.5V~24V ±4.5V~15V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 1.5Ohm |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 78 dB |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 24pF 23pF |
| On-state Resistance Match-Nom | 0.04Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 140ns, 110ns |
| Charge Injection | -41pC |
| Channel-to-Channel Matching (ΔRon) | 40m Ω |
| Crosstalk | -104dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 280ns |
| Normal Position | NC |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| RoHS Status | ROHS3 Compliant |
DG1411EEQ-T1-GE4 Overview
Shipping overseas is convenient with the electronic component packed in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. The operating temperature is extended to around -40°C~125°C TA. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. It is safe to turn on and run the electronic component with a 5V voltage supply. A SPST - NC switching circuit is used to build these analog multiplexers. Circuits number 4 make up this analogue multiplexer.
DG1411EEQ-T1-GE4 Features
1 Channels
Switch Circuit: SPST - NC
-3db Bandwidth: 150MHz
DG1411EEQ-T1-GE4 Applications
There are a lot of Vishay Siliconix DG1411EEQ-T1-GE4 Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- Imaging
- Data Acquisition Systems
- DSLAMs
- High speed data transmission line cards
- Precision data acquisition
- Avionics test equipment
- Isolation
- E1 Network Equipment
- Cross Connects
