DG1413EN-T1-GE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VQFN Exposed Pad |
| Number of Pins | 16 |
| Weight | 57.09594mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.8Ohm |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DG1413 |
| Number of Channels | 1 |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~24V ±4.5V~15V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 16.5V |
| -3db Bandwidth | 210MHz |
| On-State Resistance (Max) | 1.5Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 550pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 24pF |
| On-state Resistance Match-Nom | 0.08Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | -20pC |
| Channel-to-Channel Matching (ΔRon) | 80m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switch-on Time-Max | 510ns |
| Switch-off Time-Max | 380ns |
| Height Seated (Max) | 0.95mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG1413EN-T1-GE4 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-VQFN Exposed Pad. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 1:1. Operating temperature around -40°C~125°C TA extended. Totally, there are 16 terminations. The electronic part provides high-quality output because it has 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. Unlike digital switches, these are based on SPST - NO/NC switching circuits. Try searching for DG1413 variants of the analog switch ic. This digital multiplexer has 1.8Ohm internal resistance. You can find the functions of the 16 pins in the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 24V. Analogue multiplexers of the Dual, Single supply type that are cost-effective. 4.5V should be the lowest voltage fed to the electronic component. A digital multiplexer may suffer damage if voltage is applied above 1μA. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. When using dual power supplies, you should attach at least 4.5V. A 4 input needs to be operated.
DG1413EN-T1-GE4 Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 210MHz
DG1413EN-T1-GE4 Applications
There are a lot of Vishay Siliconix DG1413EN-T1-GE4 Analog Switches & Multiplexers ICs applications.
- ISDN NT1/TA
- Ultrasound
- Microwave transmission systems
- Channelized and Unchannelized DS3 applications
- Data Acquisition Systems
- ATM
- FTTH
- Avionics test equipment
- MP3 players
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
