DG1413EQ-T1-GE3
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 1.8Ohm |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | DG1413 |
| Number of Channels | 1 |
| Max Supply Voltage | 24V |
| Min Supply Voltage | 4.5V |
| Max Supply Current | 1μA |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~24V ±4.5V~15V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Turn-Off Delay Time | 120 ns |
| Max Dual Supply Voltage | 16.5V |
| -3db Bandwidth | 210MHz |
| On-State Resistance (Max) | 1.8Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 550pA |
| Channel Capacitance (CS(off), CD(off)) | 11pF 24pF |
| On-state Resistance Match-Nom | 0.08Ohm |
| Switch Circuit | SPST - NO/NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 120ns |
| Charge Injection | -20pC |
| Channel-to-Channel Matching (ΔRon) | 80m Ω |
| Crosstalk | -100dB @ 1MHz |
| Switch-on Time-Max | 510ns |
| Switch-off Time-Max | 380ns |
| Height Seated (Max) | 1.2mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG1413EQ-T1-GE3 Overview
Shipping overseas is convenient due to the electrical component's packing in 16-TSSOP (0.173, 4.40mm Width). High reliability is provided by advanced packaging method Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. There are 16 terminations totally. A 1 channel electronic part produces high-quality output. An 5V voltage supply should allow the electrical part to be turned on and run. A SPST - NO/NC switching circuit is used to build these analog multiplexers. Search with DG1413 if you are looking for analog multiplexer variants. As far as internal resistance is concerned, it has 1.8Ohm. To find out what the functions of 16 pins are, please refer to their datasheets. Users should never supply a voltage higher than 24V to a switch device. The digital multiplexer has a low cost Dual, Single supply. 4.5V is the lowest voltage that should be fed to the electronic electronic part. It may damage the digital multiplexer if the voltage is higher than 1μA. There is no problem with using dual supply voltage, but it should not exceed 16.5V. If you are using a dual power supply, you should attach at least 4.5V. Among the inputs that can be operated are the 4 inputs.
DG1413EQ-T1-GE3 Features
1 Channels
Switch Circuit: SPST - NO/NC
-3db Bandwidth: 210MHz
DG1413EQ-T1-GE3 Applications
There are a lot of Vishay Siliconix DG1413EQ-T1-GE3 Analog Switches & Multiplexers ICs applications.
- Wireless Local Loop
- New designs requiring multiplexer functions
- Switching Systems
- Avionics test equipment
- Remote wireless modules
- Sample hold systems
- Central office
- Digital cross connects (DSX-1)
- Battery Powered Systems
- SONET
