DG180AP
| Parameters | |
|---|---|
| On-State Resistance (Max) | 10Ohm |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 21pF 17pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Drain to Source Resistance | 10Ohm |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.05mm |
| Length | 19.56mm |
| Width | 7.87mm |
| RoHS Status | Non-RoHS Compliant |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-DIP |
| Weight | 1.620005g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 10Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 825mW |
| Operating Supply Voltage | 15V |
| Number of Circuits | 2 |
| Max Supply Current | 1.5mA |
| Turn On Delay Time | 400 ns |
| Supply Type | Dual |
| Turn-Off Delay Time | 200 ns |
DG180AP Overview
Presented in 14-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have the same number of circuits 1:1. Operating temperature around -55°C~125°C TA extended. SPST - NC switching circuits are used in these analog switch ics. This multiplexer is composed of 2 circuits. As far as internal resistance is concerned, it has 10Ohm. To find out what the 14 pins do, please refer to the datasheets. Analog switch ics with Dual supply type are cost-effective. If you put voltage higher than 1.5mA on the digital multiplexer, damage may occur. There is a voltage range of 15V operating voltages for the electrical part. Temperatures above 125°C should not be used to operate the switches. Drain to Source resistance is 10Ohm. Suppliers offer the 14-DIP package.
DG180AP Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 10Ohm
DG180AP Applications
There are a lot of Vishay Siliconix DG180AP Analog Switches & Multiplexers ICs applications.
- Precision data acquisition
- Medical systems
- Imaging
- Mechanical reed relay replacement
- PBX interfaces
- Cross Connects
- Avionics and Military Systems
- Fiber to the Home
- Audio signal routing
- Ultrasound
