DG181AA
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Supplier Device Package | TO-100-10 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 30Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 450mW |
| Number of Outputs | 2 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Power Dissipation | 450mW |
| Max Supply Current | 1.5mA |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 2 |
| Supply Type | Dual |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 30Ohm |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 6pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 130ns |
| Drain to Source Resistance | 30Ohm |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 4.7mm |
| Length | 9.4mm |
| Width | 9.4mm |
| RoHS Status | Non-RoHS Compliant |
DG181AA Overview
The electronic component is convenient to ship overseas because it is packed in a TO-100-10 Metal Can. A high level of reliability can be achieved through the use of an advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. A high-quality output is provided by the electrical component's 2 channels. On the other hand, analog switches can be constructed using SPST - NC switching circuits. The multiplexer consists of 2 circuits. Internally, this switch multiplexer has a resistance of 30Ohm. The datasheets for the 10 pins explain the functions. Dual supply type digital switch with a low cost. A voltage higher than 1.5mA may cause damage to the switch multiplexer. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 18V. You should attach at least 10V voltage if you are using dual power supply. There is a voltage range of 15V operating voltages for the electrical part. Operating 2 inputs is required. The switches should not operate in an environment where the temperature is higher than 125°C. Resistivity from Drain to Source is 30Ohm for this electronic part. The analog switch ics has 2 outputs. Suppliers offer the TO-100-10 package.
DG181AA Features
2 Channels
Switch Circuit: SPST - NC
Drain-to-Source resistance: 30Ohm
DG181AA Applications
There are a lot of Vishay Siliconix DG181AA Analog Switches & Multiplexers ICs applications.
- Precision test equipment
- Microprocessor controlled systems
- Digital Cross-Connects
- ATM
- Medical systems
- Precision data acquisition
- Access Concentrators
- SDH/SONET multiplexers
- New designs requiring multiplexer functions
- Battery-powered systems
