DG181AP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-DIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Weight | 1.620005g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2005 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 30Ohm |
| Max Power Dissipation | 825mW |
| Reach Compliance Code | unknown |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Power Dissipation | 825mW |
| Max Supply Current | 1.5mA |
| Turn On Delay Time | 150 ns |
| Number of Inputs | 2 |
| Supply Type | Dual |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 30Ohm |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 6pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 150ns, 130ns |
| Drain to Source Resistance | 30Ohm |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.05mm |
| Length | 19.56mm |
| Width | 7.87mm |
| RoHS Status | Non-RoHS Compliant |
DG181AP Overview
Presented in 14-DIP (0.300, 7.62mm), this electrical component is convenient for overseas shipping. In order to provide high reliability, an advanced packaging method Tube is used. In Through Hole, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -55°C~125°C TA. A SPST - NC switching circuit is used to build these analog multiplexers. Internally, this switch multiplexer has a resistance of 30Ohm. Please refer to the datasheets for 14 pins functions. The digital multiplexer has a low cost Dual supply. Putting voltage greater than 1.5mA on the multiplexer may cause damage. Despite this switch's dual supply capability, its voltage should not exceed 18V. If you are using dual power supplies, you should attach at least 10V. This electrical part is compatible with 15V operating voltages. In order to operate the 2 inputs, there are several steps to follow. There is 30Ohm resistance between the Drain and Source on this part.
DG181AP Features
Switch Circuit: SPST - NC
Drain-to-Source resistance: 30Ohm
DG181AP Applications
There are a lot of Vishay Siliconix DG181AP Analog Switches & Multiplexers ICs applications.
- Industrial
- E1 Network Equipment
- ATM
- Avionics
- MP3 players
- Data switching
- Audio and video signal routing
- Switching Systems
- Audio signal routing
- PDH Multiplexers
