DG184AP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 16 |
| Weight | 1.627801g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 30Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 900mW |
| Number of Functions | 2 |
| Reach Compliance Code | unknown |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 15V |
| Number of Circuits | 2 |
| Max Supply Current | 3mA |
| Turn On Delay Time | 150 ns |
| Supply Type | Dual |
| Turn-Off Delay Time | 130 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 30Ohm |
| Min Dual Supply Voltage | 10V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 6pF |
| Switch Circuit | DPST - NO |
| Switch Time (Ton, Toff) (Max) | 150ns, 130ns |
| Switching | BREAK-BEFORE-MAKE |
| Drain to Source Resistance | 30Ohm |
| Normal Position | NO |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.05mm |
| Length | 21.08mm |
| Width | 7.87mm |
| Radiation Hardening | Yes |
| RoHS Status | Non-RoHS Compliant |
DG184AP Overview
Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operational temperature extended around -55°C~125°C TA. In total, there are 16 terminations. An injection of 16 pins is performed into the body of the electrical component. Based on DPST - NO switching circuits, these analog multiplexers work. It consists of 2 circuits. This digital multiplexer has 30Ohm internal resistance. Datasheets for functions of 16 pins are available. In this analog multiplexer, the value is Multiplexer or Switches. An effective Dual supply digital multiplexer. If you put voltage higher than 3mA on the digital multiplexer, damage may occur. There is no problem with using dual supply voltage, but it should not exceed 18V. With dual power supplies, you should attach at least 10V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. It can operate from 15V operating voltages. There is 30Ohm resistance between Drain and Source for this electronic part.
DG184AP Features
Switch Circuit: DPST - NO
Drain-to-Source resistance: 30Ohm
DG184AP Applications
There are a lot of Vishay Siliconix DG184AP Analog Switches & Multiplexers ICs applications.
- Industrial
- Precision data acquisition
- E1 Network Equipment
- Channelized and Unchannelized DS3 applications
- Avionics and Military Systems
- E1 Multiplexer
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Data switching
- Power routing
- Industrial and process control systems
