DG186AA/883
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | TO-100-10 Metal Can |
| Number of Pins | 10 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Resistance | 10Ohm |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Terminal Position | BOTTOM |
| Terminal Form | WIRE |
| Number of Functions | 1 |
| Reach Compliance Code | unknown |
| Pin Count | 10 |
| Qualification Status | Not Qualified |
| Number of Circuits | 1 |
| Power Dissipation | 450mW |
| Number of Inputs | 2 |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 10Ohm |
| Min Dual Supply Voltage | 10V |
| Screening Level | 38535Q/M;38534H;883B |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 10nA |
| Channel Capacitance (CS(off), CD(off)) | 21pF 17pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 400ns, 200ns |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Dual (V±) | ±15V |
| RoHS Status | Non-RoHS Compliant |
DG186AA/883 Overview
The electronic part can be shipped overseas conveniently because it is packaged in TO-100-10 Metal Can. This high-reliability packaging method uses advanced packaging methods Tube. The multiplexer is located in Through Hole. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operational temperature extended around -55°C~125°C TA. In total, there have been 10 terminations. An injection of 10 pins is performed into the body of the electrical component. Circuits based on SPDT switching are used to construct these analog switch ics. This multiplexer is composed of 1 circuits. There is 10Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 10 pins functions. The analog multiplexer shown here is a typical Multiplexer or Switches. There is no problem with using dual supply voltage, but it should not exceed 18V. You should attach at least 10V voltage if you are using dual power supply. The 2 inputs need to be operated in order to work.
DG186AA/883 Features
Switch Circuit: SPDT
DG186AA/883 Applications
There are a lot of Vishay Siliconix DG186AA/883 Analog Switches & Multiplexers ICs applications.
- Cable PC
- Medical systems
- Fiber In The Loop (FITL)
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Avionics test equipment
- Avionics and Military Systems
- Ultrasound
- Intelligent PBX
- DSLAMs
- Digital Cross-Connects
