DG200AAK
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 14-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Supplier Device Package | 14-CERDIP |
| Weight | 1.200007g |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2009 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 70Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Max Power Dissipation | 825mW |
| Number of Outputs | 2 |
| Operating Supply Voltage | 15V |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 13V |
| Power Dissipation | 825mW |
| Max Supply Current | 2mA |
| Turn On Delay Time | 1 μs |
| Number of Inputs | 2 |
| Supply Type | Dual |
| Turn-Off Delay Time | 425 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 7V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 440ns, 340ns |
| Charge Injection | -10pC |
| Crosstalk | -90dB @ 1MHz |
| Voltage - Supply, Dual (V±) | ±15V |
| Height | 3.94mm |
| Length | 19.56mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
DG200AAK Overview
The electronic component is convenient to ship overseas because it is packed in a 14-CDIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -55°C~125°C TA. Due to its 2 channels, the electrical component produces high-quality output. Unlike digital switches, these are based on SPST - NC switching circuits. A 2 circuit is present in this switch device. This digital multiplexer has 70Ohm internal resistance. You can find the functions of the 14 pins in the datasheets. An abnormal situation would be for the switch device to be supplied with a voltage greater than 36V. The digital multiplexer has a low cost Dual supply. It is recommended to use 13V as the lowest voltage for the electrical part. A voltage higher than 2mA may cause damage to the switch multiplexer. There is no problem with using dual supply voltage, but it should not exceed 22V. You should attach at least 7V voltage if you are using dual power supply. Operating voltages range from 15V. The 2 inputs need to be operated in order to work. In an environment with a temperature higher than 125°C, the digital switches should not operate. A analog switch ics with 2 outputs is included. Suppliers offer the 14-CERDIP package.
DG200AAK Features
2 Channels
Switch Circuit: SPST - NC
DG200AAK Applications
There are a lot of Vishay Siliconix DG200AAK Analog Switches & Multiplexers ICs applications.
- Residential Gateways, Home Gateway/Router
- Sample-and-hold systems
- PDAs
- Medical systems
- Sample hold systems
- Channelized and Unchannelized DS3 applications
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Industrial and process control systems
- PDH Multiplexers
- Data switching
