DG200AAK/883B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Resistance | 70Ohm |
| Max Power Dissipation | 727mW |
| Technology | CMOS |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Operating Supply Voltage | 15V |
| Number of Channels | 1 |
| Number of Circuits | 2 |
| Max Supply Voltage | 25V |
| Max Supply Current | 2mA |
| Turn On Delay Time | 1 μs |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 425 ns |
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 70Ohm |
| Min Dual Supply Voltage | 4.5V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 2nA |
| Channel Capacitance (CS(off), CD(off)) | 9pF 9pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 1μs, 500ns |
| Charge Injection | 10pC |
| Crosstalk | -90dB @ 1MHz |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
DG200AAK/883B Overview
This electronic part is conveniently packaged in 16-CDIP (0.300, 7.62mm), making it easy to ship abroad. Advanced packaging method Tube is used to provide high reliability. In Through Hole, this analog switch is mounted. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operation at a temperature around -55°C~125°C TA. A total of 14 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. A SPST - NC switching circuit is used for these analog switches. The circuits in this analogue multiplexer number 2. Internally, this switch multiplexer has a resistance of 70Ohm. To find out what the functions of 14 pins are, please refer to their datasheets. Users shouldn't supply more than 25V voltage to the switch device. Digital switch that provides Dual, Single power at a cost-effective price. The analogue multiplexer may be damaged if voltage is greater than 2mA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 18V. The voltage should be at least 4.5V if you are using dual power supplies. The electronic component can function from 15V.
DG200AAK/883B Features
1 Channels
Switch Circuit: SPST - NC
DG200AAK/883B Applications
There are a lot of Maxim Integrated DG200AAK/883B Analog Switches & Multiplexers ICs applications.
- Optical Applications
- PBX interfaces
- Fault Tolerant Systems
- Private Branch Exchange (PBX)
- Access Concentrators
- Sample-and-hold systems
- Medical systems
- DSUs
- Microprocessor Controlled Analog Systems
- Industrial
