DG2011DXA-T1-E3

75ns, 59ns SPDT 2.7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2011 6 Pins 1nA 3V SOT-563, SOT-666

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG2011DXA-T1-E3
Package: SOT-563, SOT-666
Datasheet: PDF
Stock: 699
Description: 75ns, 59ns SPDT 2.7Ohm DUAL Analog Switches BREAK-BEFORE-MAKE DG2011 6 Pins 1nA 3V SOT-563, SOT-666(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	SOT-563, SOT-666
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
Resistance	2.7Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	172mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG2011
Pin Count	6
Number of Outputs	2
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Operating Supply Current	10nA
Nominal Supply Current	10nA
Power Dissipation	172mW
Max Supply Current	1μA
Turn On Delay Time	75 ns
Number of Inputs	1
Supply Type	Single
Turn-Off Delay Time	59 ns
On-State Resistance (Max)	2.7Ohm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	62 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	29pF
On-state Resistance Match-Nom	0.2Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	75ns, 59ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	200m Ω (Max)
Crosstalk	-69dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.8V~5.5V
Drain to Source Resistance	1.8Ohm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG2011DXA-T1-E3 Overview

The electronic part can be shipped overseas conveniently because it is packaged in SOT-563, SOT-666. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. A total of 6 terminations have been recorded. As a result of its 1 channels, this electronic component provides high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 6 pins are injected into the electrical part body. Multiplexers built on a SPDT switching circuit are built. Try searching with DG2011 if you're looking for variants. There is 2.7Ohm internal resistance in this digital multiplexer. For functions related to 6 pins, please refer to the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. An abnormal situation would be for the switch device to be supplied with a voltage greater than 5.5V. Digital switch that provides Single power at a cost-effective price. There should be 1.8V voltage fed to the electrical part below 1.8V. This digital switch can be operated with a current of 10nA. Draining from a single voltage supply, this analog switch requires a voltage of 1.8V~5.5V. The switch multiplexer may be damaged if it is exposed to voltage greater than 1μA. A 1 input needs to be operated. Drain to Source resistance is 1.8Ohm. This digital multiplexer has 2 outputs.