DG201BDQ-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 160Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | DG201 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 50μA |
| Power Dissipation | 640mW |
| Throw Configuration | SPST |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~25V ±4.5V~22V |
| Supply Type | Dual, Single |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 300ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2Ohm |
| Crosstalk | -95dB @ 100kHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DG201BDQ-E3 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operational temperature extended around -40°C~85°C TA. A 4 channel electronic part produces high-quality output. On the other hand, analog switches can be constructed using SPST - NC switching circuits. A 4 circuit is present in this switch device. DG201 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 160Ohm. The datasheets for the 16 pins explain the functions. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 4.5V. An operating current of 50μA would be sufficient for this switch device. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. For dual power supplies, a voltage of at least 4.5V should be attached. The electrical component supports 4 inputs. A temperature above 85°C is not suitable for operation of the analogue multiplexer. 4 outputs are included in the analogue multiplexer. There is a 16-TSSOP package offered by suppliers.
DG201BDQ-E3 Features
4 Channels
Switch Circuit: SPST - NC
50μA Supply Current
DG201BDQ-E3 Applications
There are a lot of Vishay Siliconix DG201BDQ-E3 Analog Switches & Multiplexers ICs applications.
- MP3 players
- PDH Multiplexers
- Optical Applications
- Audio and video routing
- High reliability control systems
- Channel Banks
- Access Concentrators
- Precision data acquisition
- Ultrasound
- Cable Telephony – NIU, Set-Top Box, Home Side Box
