DG201HSDY-E3

60ns, 50ns SPST - NC 50Ohm Analog Switches BREAK-BEFORE-MAKE DG201 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Vishay Siliconix
Nocochips NO: 880-DG201HSDY-E3
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 678
Description: 60ns, 50ns SPST - NC 50Ohm Analog Switches BREAK-BEFORE-MAKE DG201 16 Pins 1nA 15V 16-SOIC (0.154, 3.90mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Weight	547.485991mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	90Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	600mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	15V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	DG201
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	16.5V
Number of Channels	1
Max Supply Voltage	25V
Min Supply Voltage	13V
Operating Supply Current	10mA
Nominal Supply Current	4.5mA
Power Dissipation	600mW
Max Supply Current	10mA
Throw Configuration	SPST
Turn On Delay Time	60 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	50 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	50Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	0.75Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	60ns, 50ns
Charge Injection	-5pC
Channel-to-Channel Matching (ΔRon)	1.5 Ω
Crosstalk	-100dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Height	1.55mm
Length	10mm
Width	4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG201HSDY-E3 Overview

Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. High reliability is ensured by the advanced packaging method Tube. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. Operating temperature around -40°C~85°C TA extended. 16 terminations have been made so far. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 16 series. SPST - NC switching circuits are used in these analog switch ics. Try searching with DG201 to find analog multiplexer variants. A 90Ohm internal resistance characterizes this multiplexer. The functions of 16 pins can be found in the datasheets. Theswitch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 25V. An effective Dual, Single supply digital multiplexer. There should be 13V voltage fed to the electrical part below 13V. This digital switch can be operated with a current of 10mA. When the digital multiplexer is charged above 10mA, damage can occur. Despite this switch's dual supply capability, its voltage should not exceed 22V. If you are using a dual power supply, you should attach at least 7V. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. The electrical part can be operated at 16.5V voltage levels. It is possible to operate 4 inputs.