DG201HSDY-T1
| Parameters | |
|---|---|
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 50Ohm |
| Terminal Finish | TIN LEAD |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 600mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Output | SEPARATE OUTPUT |
| Pin Count | 16 |
| Operating Supply Voltage | 16.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 13V |
| Nominal Supply Current | 4.5mA |
| Power Dissipation | 600mW |
| Max Supply Current | 10mA |
| Throw Configuration | SPST |
| Turn On Delay Time | 60 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 10.8V~16.5V ±15V |
| Supply Type | Dual, Single |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Turn-Off Delay Time | 50 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 50Ohm |
| Min Dual Supply Voltage | 7V |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 85 dB |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 0.75Ohm |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 60ns, 50ns |
| Charge Injection | -5pC |
| Channel-to-Channel Matching (ΔRon) | 1.5 Ω |
| Crosstalk | -100dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Normal Position | NC |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 547.485991mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e0 |
DG201HSDY-T1 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. High reliability is ensured by the advanced packaging method Tape & Reel (TR). It is mounted in the position Surface Mount. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. In total, 16 terminations have occurred. By its 1 channels, the electronic component provides high-quality output. When a voltage supply of 15V is used, the electronic component should be turned on and run. This electrical component is included in the 16 series of products. These analog multiplexers are built based on SPST - NC switching circuits. Internally, this switch multiplexer has a resistance of 50Ohm. The functions of 16 pins can be found in the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 25V. An effective Dual, Single supply digital multiplexer. It is recommended that the electrical component receives a voltage of 13V. The switch multiplexer may be damaged if it is exposed to voltage greater than 10mA. If put voltage greater than 22V on the multiplexer, damage may be caused to the device. With dual power supplies, you should attach at least 7V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. The electrical part can be operated at 16.5V voltage levels. A 4 input needs to be operated.
DG201HSDY-T1 Features
1 Channels
Switch Circuit: SPST - NC
DG201HSDY-T1 Applications
There are a lot of Vishay Siliconix DG201HSDY-T1 Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- High-Voltage
- Private Branch Exchange (PBX)
- FTTH
- High reliability control systems
- Channelized and Unchannelized DS3 applications
- Digital Cross-Connects
- Data Acquisition Systems
- Medical
- Wireless Local Loop
