Parameters |
Channel-to-Channel Matching (ΔRon) |
1.5 Ω |
Crosstalk |
-100dB @ 100kHz |
Switching |
BREAK-BEFORE-MAKE |
Switch-on Time-Max |
60ns |
Switch-off Time-Max |
50ns |
Normal Position |
NC |
Height |
1.55mm |
Length |
10mm |
Width |
4mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-SOIC (0.154, 3.90mm Width) |
Number of Pins |
16 |
Weight |
547.485991mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2009 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
90Ohm |
Terminal Finish |
Matte Tin (Sn) |
Subcategory |
Multiplexer or Switches |
Max Power Dissipation |
640mW |
Technology |
CMOS |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
4 |
Supply Voltage |
15V |
Terminal Pitch |
1.27mm |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
DG201 |
Output |
SEPARATE OUTPUT |
Pin Count |
16 |
Operating Supply Voltage |
16.5V |
Number of Channels |
1 |
Max Supply Voltage |
25V |
Min Supply Voltage |
13V |
Operating Supply Current |
10mA |
Nominal Supply Current |
3.5mA |
Power Dissipation |
600mW |
Max Supply Current |
10mA |
Throw Configuration |
SPST |
Turn On Delay Time |
75 ns |
Number of Inputs |
4 |
Voltage - Supply, Single/Dual (±) |
10.8V~16.5V ±15V |
Supply Type |
Dual, Single |
Neg Supply Voltage-Nom (Vsup) |
-15V |
Turn-Off Delay Time |
70 ns |
Max Dual Supply Voltage |
22V |
On-State Resistance (Max) |
50Ohm |
Min Dual Supply Voltage |
7V |
Dual Supply Voltage |
15V |
Multiplexer/Demultiplexer Circuit |
1:1 |
Off-state Isolation-Nom |
85 dB |
Current - Leakage (IS(off)) (Max) |
1nA |
Channel Capacitance (CS(off), CD(off)) |
5pF |
On-state Resistance Match-Nom |
0.75Ohm |
Switch Circuit |
SPST - NC |
Switch Time (Ton, Toff) (Max) |
60ns, 50ns |
Charge Injection |
-5pC |
DG201HSDY-T1-E3 Overview
Packed in 16-SOIC (0.154, 3.90mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. A total of 16 terminations have been recorded. A electrical component with 1 channels is capable of high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. A total of 16 pins are injected into the electrical part body. Unlike digital switches, these are based on SPST - NC switching circuits. Try searching for DG201 variants of the analog switch ic. It has an internal resistance of 90Ohm. For details about the functions of 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 25V volts for the multiplexer. Analogue multiplexers of the Dual, Single supply type that are cost-effective. The lowest voltage fed to the electronic component should be 13V. In order to operate this switch device, it would need a current of 10mA. If put voltage greater than 10mA on the device, damage may be caused to the analogue multiplexer. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 22V. It is recommended that you attach at least 7V to your dual power supply. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating voltages of 16.5V are compatible with the electrical part. Operating the 4 inputs requires 4 inputs.
DG201HSDY-T1-E3 Features
1 Channels
Switch Circuit: SPST - NC
10mA Supply Current
DG201HSDY-T1-E3 Applications
There are a lot of Vishay Siliconix DG201HSDY-T1-E3 Analog Switches & Multiplexers ICs applications.
- Modems
- SONET/SDH ADM
- Battery Powered Instruments
- E1 Multiplexer
- Wireless Local Loop
- Cell phones
- Voice over IP/DSL – Integrated Access Devices, Smart
- Automatic test equipment
- High reliability control systems
- Audio/video switches