DG202BDY-T1-E3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Weight | 665.986997mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Resistance | 85Ohm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 640mW |
| Base Part Number | DG202 |
| Number of Outputs | 4 |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 50μA |
| Nominal Supply Current | 50μA |
| Power Dissipation | 640mW |
| Max Supply Current | 50μA |
| Throw Configuration | SPST |
| Turn On Delay Time | 300 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 4.5V~25V ±4.5V~22V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 200 ns |
| Max Dual Supply Voltage | 22V |
| On-State Resistance (Max) | 85Ohm |
| Min Dual Supply Voltage | 4.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 500pA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 300ns, 200ns |
| Charge Injection | 1pC |
| Channel-to-Channel Matching (ΔRon) | 2Ohm |
| Crosstalk | -95dB @ 100kHz |
| Drain to Source Resistance | 85Ohm |
| Height | 1.55mm |
| Length | 10mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DG202BDY-T1-E3 Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is provided by advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. This electronic part offers high-quality output due to its 4 channels. These analog multiplexers are built based on SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Try searching with DG202 to find analog multiplexer variants. In this multiplexer, the internal resistance is 85Ohm. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 25V. Digital switch that provides Dual, Single power at a cost-effective price. There should be 4.5V voltage fed to the electrical part below 4.5V. 50μA current would be enough for this multiplexer to operate. The analogue multiplexer may be damaged if voltage is greater than 50μA. For this switch, a dual supply voltage is feasible, but it must not exceed 22VIt is recommended that you attach at least 4.5V to your dual power supply. A 4 input needs to be operated. During operation, the multiplexer should not be exposed to a temperature above 85°C. Drain to Source resistance for this electronic component is 85Ohm. This digital multiplexer has 4 outputs. Suppliers offer a 16-SOIC package.
DG202BDY-T1-E3 Features
4 Channels
Switch Circuit: SPST - NO
50μA Supply Current
Drain-to-Source resistance: 85Ohm
DG202BDY-T1-E3 Applications
There are a lot of Vishay Siliconix DG202BDY-T1-E3 Analog Switches & Multiplexers ICs applications.
- Digital Cross-Connects
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- SONET
- Data switching
- T1/E1 Terminals
- MP3 players
- FTTH
- Intelligent PBX
- Digital cross connects (DSX-1)
- Remote wireless modules
